[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU
Konrad Rzeszutek Wilk wrote: > On Mon, Jun 13, 2011 at 10:50:03PM +0200, Tobias Diedrich wrote: > > Hi, > > > > another issue I'm seeing with 3.0-rc2 and Xen is that there is an > > unexpectedly high amount of kernel reserved memory. > > > > > I suspect that Linux allocates page table entries and corresponding > > data structures for the whole 6GB areas of the provided 'physical > > RAM map' even though it has rather big unusable holes in it. > > Can you run it with 'memblock=debug debug loglevel=8 initcall_debug'? > It should tell you where it tries (and for much space) the pagetables. Here is a diff between verbose domu with and without mem=256M (with "s@after [0-9]* usecs@after XX usecs@g" to suppress the timing differences somewhat) --- noextraopts 2011-06-14 23:02:24.549323941 +0200 +++ mem256 2011-06-14 23:01:46.140538541 +0200 @@ -1,7 +1,7 @@ Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.0.0-rc2 (ranma@nukunuku) (gcc version 4.5.2 (Debian 4.5.2-11) ) #53 SMP Tue Jun 14 15:33:45 CEST 2011 -Command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 +Command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro mem=256M ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 ACPI in unprivileged domain disabled released 0 pages of unused memory Set 0 page(s) to 1-1 mapping. @@ -10,22 +10,25 @@ Xen: 00000000000a0000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000010000000 (usable) Xen: 0000000100000000 - 0000000100800000 (usable) +e820 remove range: 0000000010000000 - ffffffffffffffff (usable) NX (Execute Disable) protection: active MPS support code is not built-in. Using acpi=off or acpi=noirq or pci=noacpi may have problem +user-defined physical RAM map: + user: 0000000000000000 - 00000000000a0000 (usable) + user: 00000000000a0000 - 0000000000100000 (reserved) + user: 0000000000100000 - 0000000010000000 (usable) DMI not present or invalid. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found -last_pfn = 0x100800 max_arch_pfn = 0x400000000 last_pfn = 0x10000 max_arch_pfn = 0x400000000 memblock_x86_reserve_range: [0x01ce8000-0x01cf8fff] BRK MEMBLOCK configuration: - memory size = 0x10790000 - memory.cnt = 0x3 + memory size = 0xff90000 + memory.cnt = 0x2 memory[0x0] [0x00000000010000-0x0000000009ffff], 0x90000 bytes memory[0x1] [0x00000000100000-0x0000000fffffff], 0xff00000 bytes - memory[0x2] [0x00000100000000-0x000001007fffff], 0x800000 bytes reserved.cnt = 0x3 reserved[0x0] [0x00000001000000-0x00000001cf8fff], 0xcf9000 bytes reserved[0x1] [0x00000001e1e000-0x00000001eb3fff], 0x96000 bytes @@ -38,123 +41,109 @@ kernel direct mapping tables up to 10000000 @ ff7e000-10000000 memblock_x86_reserve_range: [0x0ff7e000-0x0ffe9fff] PGTABLE xen: setting RW the range ffea000 - 10000000 -init_memory_mapping: 0000000100000000-0000000100800000 - 0100000000 - 0100800000 page 4k -kernel direct mapping tables up to 100800000 @ f774000-ff7e000 - memblock_x86_reserve_range: [0x0f774000-0x0f778fff] PGTABLE -xen: setting RW the range f779000 - ff7e000 memblock_x86_reserve_range: [0x0ffff000-0x0fffffff] BOOTMEM memblock_x86_reserve_range: [0x0fb7e000-0x0ff7dfff] BOOTMEM - memblock_x86_reserve_range: [0x0fffef80-0x0fffefc7] BOOTMEM + memblock_x86_reserve_range: [0x0fffefc0-0x0fffefef] BOOTMEM memblock_x86_reserve_range: [0x0f77e000-0x0fb7dfff] BOOTMEM - memblock_x86_reserve_range: [0x0f000000-0x0f5fffff] BOOTMEM + memblock_x86_reserve_range: [0x0f200000-0x0f5fffff] BOOTMEM memblock_x86_reserve_range: [0x0fffd000-0x0fffdfff] BOOTMEM memblock_x86_reserve_range: [0x0fffc000-0x0fffcfff] BOOTMEM memblock_x86_reserve_range: [0x0fffb000-0x0fffbfff] BOOTMEM memblock_x86_reserve_range: [0x0fffa000-0x0fffafff] BOOTMEM - memblock_x86_reserve_range: [0x0fff9000-0x0fff9fff] BOOTMEM - memblock_x86_free_range: [0x0f540000-0x0f5fffff] + memblock_x86_free_range: [0x0f580000-0x0f5fffff] memblock_x86_free_range: [0x0f77e000-0x0fb7dfff] memblock_x86_free_range: [0x0fb7e000-0x0ff7dfff] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 - Normal 0x00100000 -> 0x00100800 + Normal empty Movable zone start PFN for each node -early_node_map[3] active PFN ranges +early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x000000a0 0: 0x00000100 -> 0x00010000 - 0: 0x00100000 -> 0x00100800 -On node 0 totalpages: 67472 +On node 0 totalpages: 65424 DMA zone: 56 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3926 pages, LIFO batch:0 - memblock_x86_reserve_range: [0x0fffee00-0x0fffef7f] BOOTMEM - DMA32 zone: 14280 pages used for memmap - DMA32 zone: 47160 pages, LIFO batch:15 - memblock_x86_reserve_range: [0x0ff66000-0x0ff7dfff] BOOTMEM - Normal zone: 28 pages used for memmap - Normal zone: 2020 pages, LIFO batch:0 - memblock_x86_reserve_range: [0x0fffed40-0x0fffedff] BOOTMEM - memblock_x86_reserve_range: [0x0fff8000-0x0fff8fff] BOOTMEM + memblock_x86_reserve_range: [0x0fffee40-0x0fffefbf] BOOTMEM + DMA32 zone: 840 pages used for memmap + DMA32 zone: 60600 pages, LIFO batch:15 + memblock_x86_reserve_range: [0x0fff8800-0x0fff9fff] BOOTMEM memblock_x86_reserve_range: [0x0fff7000-0x0fff7fff] BOOTMEM memblock_x86_reserve_range: [0x0fff6000-0x0fff6fff] BOOTMEM + memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM SMP: Allowing 1 CPUs, 0 hotplug CPUs No local APIC present APIC: disable apic facility APIC: switched to apic NOOP nr_irqs_gsi: 16 - memblock_x86_reserve_range: [0x0fffec00-0x0fffed17] BOOTMEM - memblock_x86_reserve_range: [0x0fffeb80-0x0fffebe7] BOOTMEM - memblock_x86_reserve_range: [0x0fffeb00-0x0fffeb67] BOOTMEM - memblock_x86_reserve_range: [0x0fffea80-0x0fffeae7] BOOTMEM - memblock_x86_reserve_range: [0x0fffea00-0x0fffea67] BOOTMEM + memblock_x86_reserve_range: [0x0fffed40-0x0fffee1f] BOOTMEM + memblock_x86_reserve_range: [0x0fffecc0-0x0fffed27] BOOTMEM + memblock_x86_reserve_range: [0x0fffec40-0x0fffeca7] BOOTMEM + memblock_x86_reserve_range: [0x0fffebc0-0x0fffec27] BOOTMEM + memblock_x86_reserve_range: [0x0fffeb40-0x0fffeba7] BOOTMEM Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000) Booting paravirtualized kernel on Xen Xen version: 4.1.0 (preserve-AD) - memblock_x86_reserve_range: [0x0fffe940-0x0fffe9d2] BOOTMEM - memblock_x86_reserve_range: [0x0fffe880-0x0fffe912] BOOTMEM + memblock_x86_reserve_range: [0x0fffea80-0x0fffeb1b] BOOTMEM + memblock_x86_reserve_range: [0x0fffe9c0-0x0fffea5b] BOOTMEM setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1 - memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM memblock_x86_reserve_range: [0x0fff4000-0x0fff4fff] BOOTMEM - memblock_x86_reserve_range: [0x0ff4b000-0x0ff65fff] BOOTMEM -PERCPU: Embedded 27 pages/cpu @ffff88000ff4b000 s79488 r8192 d22912 u110592 - memblock_x86_reserve_range: [0x0fffe840-0x0fffe847] BOOTMEM - memblock_x86_reserve_range: [0x0fffe800-0x0fffe807] BOOTMEM - memblock_x86_reserve_range: [0x0fffe7c0-0x0fffe7c3] BOOTMEM - memblock_x86_reserve_range: [0x0fffe780-0x0fffe787] BOOTMEM + memblock_x86_reserve_range: [0x0fff3000-0x0fff3fff] BOOTMEM + memblock_x86_reserve_range: [0x0ff63000-0x0ff7dfff] BOOTMEM +PERCPU: Embedded 27 pages/cpu @ffff88000ff63000 s79488 r8192 d22912 u110592 + memblock_x86_reserve_range: [0x0fffe980-0x0fffe987] BOOTMEM + memblock_x86_reserve_range: [0x0fffe940-0x0fffe947] BOOTMEM + memblock_x86_reserve_range: [0x0fffe900-0x0fffe903] BOOTMEM + memblock_x86_reserve_range: [0x0fffe8c0-0x0fffe8c7] BOOTMEM pcpu-alloc: s79488 r8192 d22912 u110592 alloc=27*4096 pcpu-alloc: [0] 0 - memblock_x86_reserve_range: [0x0fffe680-0x0fffe77f] BOOTMEM - memblock_x86_reserve_range: [0x0fffe600-0x0fffe647] BOOTMEM - memblock_x86_reserve_range: [0x0fffe580-0x0fffe5c7] BOOTMEM - memblock_x86_free_range: [0x0fff5000-0x0fff5fff] + memblock_x86_reserve_range: [0x0fffe7c0-0x0fffe8bf] BOOTMEM + memblock_x86_reserve_range: [0x0fffe740-0x0fffe787] BOOTMEM + memblock_x86_reserve_range: [0x0fffe6c0-0x0fffe707] BOOTMEM memblock_x86_free_range: [0x0fff4000-0x0fff4fff] -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 53106 -Kernel command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 - memblock_x86_reserve_range: [0x0fff4000-0x0fff5fff] BOOTMEM + memblock_x86_free_range: [0x0fff3000-0x0fff3fff] +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64526 +Kernel command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro mem=256M ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 + memblock_x86_reserve_range: [0x0fff3000-0x0fff4fff] BOOTMEM PID hash table entries: 1024 (order: 1, 8192 bytes) - memblock_x86_reserve_range: [0x0ff0b000-0x0ff4afff] BOOTMEM + memblock_x86_reserve_range: [0x0ff23000-0x0ff62fff] BOOTMEM Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) - memblock_x86_reserve_range: [0x0feeb000-0x0ff0afff] BOOTMEM + memblock_x86_reserve_range: [0x0ff03000-0x0ff22fff] BOOTMEM Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) - memblock_x86_reserve_range: [0x0b000000-0x0effffff] BOOTMEM - memblock_x86_reserve_range: [0x0fecb000-0x0feeafff] BOOTMEM - memblock_x86_reserve_range: [0x0fe8b000-0x0fecafff] BOOTMEM - memblock_x86_reserve_range: [0x0ffec000-0x0fff3fff] BOOTMEM Checking aperture... No AGP bridge found Subtract (23 early reservations) [000009e000-000009ffff] [0001000000-0001cf8fff] [0001e1e000-0001eb3fff] - [000b000000-000f53ffff] - [000f774000-000f778fff] - [000fe8b000-000ffe9fff] - [000ffec000-000fffdfff] - [000fffe580-000fffe5c7] - [000fffe600-000fffe647] - [000fffe680-000fffe787] - [000fffe7c0-000fffe7c3] - [000fffe800-000fffe807] - [000fffe840-000fffe847] - [000fffe880-000fffe912] - [000fffe940-000fffe9d2] - [000fffea00-000fffea67] - [000fffea80-000fffeae7] - [000fffeb00-000fffeb67] - [000fffeb80-000fffebe7] - [000fffec00-000fffed17] - [000fffed40-000fffefc7] + [000f200000-000f57ffff] + [000ff03000-000ffe9fff] + [000fff3000-000fff7fff] + [000fff8800-000fffdfff] + [000fffe6c0-000fffe707] + [000fffe740-000fffe787] + [000fffe7c0-000fffe8c7] + [000fffe900-000fffe903] + [000fffe940-000fffe947] + [000fffe980-000fffe987] + [000fffe9c0-000fffea5b] + [000fffea80-000fffeb1b] + [000fffeb40-000fffeba7] + [000fffebc0-000fffec27] + [000fffec40-000fffeca7] + [000fffecc0-000fffed27] + [000fffed40-000fffee1f] + [000fffee40-000fffefef] [000ffff000-000fffffff] [0100000000-01007fffff] -Memory: 175388k/4202496k available (6122k kernel code, 3932608k absent, 94500k reserved, 4761k data, 576k init) +Memory: 243244k/262144k available (6122k kernel code, 448k absent, 18452k reserved, 4761k data, 576k init) Hierarchical RCU implementation. NR_IRQS:320 Console: colour dummy device 80x25 console [tty0] enabled console [hvc0] enabled -allocated 3145728 bytes of page_cgroup +allocated 2097152 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Xen: using vcpuop timer interface installing Xen timer for CPU 0 @@ -244,8 +233,8 @@ initcall debugfs_init+0x0/0x5c returned 0 after XX usecs calling calibrate_xor_blocks+0x0/0xa0 @ 1 xor: automatically using best checksumming function: generic_sse - generic_sse: 2901.200 MB/sec -xor: using function: generic_sse (2901.200 MB/sec) + generic_sse: 2833.600 MB/sec +xor: using function: generic_sse (2833.600 MB/sec) initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after XX usecs calling random32_init+0x0/0xd8 @ 1 initcall random32_init+0x0/0xd8 returned 0 after XX usecs @@ -336,14 +325,14 @@ calling genhd_device_init+0x0/0x7c @ 1 initcall genhd_device_init+0x0/0x7c returned 0 after XX usecs calling raid6_select_algo+0x0/0x1bd @ 1 -raid6: int64x1 2032 MB/s -raid6: int64x2 2398 MB/s -raid6: int64x4 1711 MB/s -raid6: int64x8 1243 MB/s -raid6: sse2x1 1750 MB/s -raid6: sse2x2 2362 MB/s -raid6: sse2x4 1807 MB/s -raid6: using algorithm sse2x2 (2362 MB/s) +raid6: int64x1 2027 MB/s +raid6: int64x2 2392 MB/s +raid6: int64x4 1703 MB/s +raid6: int64x8 1241 MB/s +raid6: sse2x1 1810 MB/s +raid6: sse2x2 2515 MB/s +raid6: sse2x4 3221 MB/s +raid6: using algorithm sse2x4 (3221 MB/s) initcall raid6_select_algo+0x0/0x1bd returned 0 after XX usecs calling pci_slot_init+0x0/0x46 @ 1 initcall pci_slot_init+0x0/0x46 returned 0 after XX usecs @@ -362,7 +351,7 @@ initcall xen_setup_shutdown_event+0x0/0x22 returned 0 after XX usecs calling balloon_init+0x0/0x130 @ 1 xen/balloon: Initialising balloon driver. -last_pfn = 0x100800 max_arch_pfn = 0x400000000 +last_pfn = 0x10000 max_arch_pfn = 0x400000000 initcall balloon_init+0x0/0x130 returned 0 after XX usecs calling xenbus_probe_backend_init+0x0/0x2d @ 1 initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after XX usecs @@ -499,9 +488,6 @@ calling populate_rootfs+0x0/0x9e @ 1 initcall populate_rootfs+0x0/0x9e returned 0 after XX usecs calling pci_iommu_init+0x0/0x41 @ 1 -PCI-DMA: Using software bounce buffering for IO (SWIOTLB) -Placing 64MB software IO TLB between ffff88000b000000 - ffff88000f000000 -software IO TLB at phys 0xb000000 - 0xf000000 initcall pci_iommu_init+0x0/0x41 returned 0 after XX usecs calling irqfd_module_init+0x0/0x31 @ 1 initcall irqfd_module_init+0x0/0x31 returned 0 after XX usecs @@ -728,7 +714,7 @@ SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled initcall init_xfs_fs+0x0/0xa9 returned 0 after XX usecs calling ipc_init+0x0/0x23 @ 1 -msgmni has been set to 342 +msgmni has been set to 475 initcall ipc_init+0x0/0x23 returned 0 after XX usecs calling ipc_sysctl_init+0x0/0x14 @ 1 initcall ipc_sysctl_init+0x0/0x14 returned 0 after XX usecs @@ -864,7 +850,6 @@ calling xen_blkif_init+0x0/0x276 @ 1 initcall xen_blkif_init+0x0/0x276 returned 0 after XX usecs calling init_sd+0x0/0x112 @ 1 -blkfront: xvda2: flush diskcache: enabled initcall init_sd+0x0/0x112 returned 0 after XX usecs calling init_sr+0x0/0x46 @ 1 initcall init_sr+0x0/0x46 returned 0 after XX usecs @@ -885,6 +870,7 @@ calling pdc2027x_init+0x0/0x1b @ 1 initcall pdc2027x_init+0x0/0x1b returned 0 after XX usecs calling sil680_init+0x0/0x1b @ 1 +blkfront: xvda2: flush diskcache: enabled initcall sil680_init+0x0/0x1b returned 0 after XX usecs calling via_init+0x0/0x1b @ 1 initcall via_init+0x0/0x1b returned 0 after XX usecs @@ -1210,7 +1196,7 @@ calling nfnetlink_log_init+0x0/0xd7 @ 1 initcall nfnetlink_log_init+0x0/0xd7 returned 0 after XX usecs calling nf_conntrack_standalone_init+0x0/0x12 @ 1 -nf_conntrack version 0.5.0 (1370 buckets, 5480 max) +nf_conntrack version 0.5.0 (1900 buckets, 7600 max) initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after XX usecs calling ctnetlink_init+0x0/0x76 @ 1 ctnetlink v0.93: registering with nfnetlink. @@ -1468,16 +1454,19 @@ calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after XX usecs async_waiting @ 1 -async_continuing @ 1 after 0 usec +async_continuing @ 1 after 44 usec md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect async_waiting @ 1 -async_continuing @ 1 after 0 usec +async_continuing @ 1 after 3 usec md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs (xvda1): error: couldn't mount because of unsupported optional features (240) -EXT2-fs (xvda1): error: couldn't mount because of unsupported optional features (240) +EXT2-fs (xvda1): error: couldn't mount because of unsupported optional features (244) +EXT4-fs (xvda1): INFO: recovery required on readonly filesystem +EXT4-fs (xvda1): write access will be enabled during recovery +EXT4-fs (xvda1): recovery complete EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 202:1. > What happens if you have 'maxmem' value equal to 'memory' in your guest > config? No difference: --- verbose_noextraopts 2011-06-14 23:02:24.549323941 +0200 +++ verbose_maxmem 2011-06-14 23:09:47.135304415 +0200 @@ -244,8 +244,8 @@ initcall debugfs_init+0x0/0x5c returned 0 after XX usecs calling calibrate_xor_blocks+0x0/0xa0 @ 1 xor: automatically using best checksumming function: generic_sse - generic_sse: 2901.200 MB/sec -xor: using function: generic_sse (2901.200 MB/sec) + generic_sse: 2834.000 MB/sec +xor: using function: generic_sse (2834.000 MB/sec) initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after XX usecs calling random32_init+0x0/0xd8 @ 1 initcall random32_init+0x0/0xd8 returned 0 after XX usecs @@ -338,12 +338,12 @@ calling raid6_select_algo+0x0/0x1bd @ 1 raid6: int64x1 2032 MB/s raid6: int64x2 2398 MB/s -raid6: int64x4 1711 MB/s +raid6: int64x4 1710 MB/s raid6: int64x8 1243 MB/s -raid6: sse2x1 1750 MB/s -raid6: sse2x2 2362 MB/s -raid6: sse2x4 1807 MB/s -raid6: using algorithm sse2x2 (2362 MB/s) +raid6: sse2x1 1926 MB/s +raid6: sse2x2 2536 MB/s +raid6: sse2x4 1539 MB/s +raid6: using algorithm sse2x2 (2536 MB/s) initcall raid6_select_algo+0x0/0x1bd returned 0 after XX usecs calling pci_slot_init+0x0/0x46 @ 1 initcall pci_slot_init+0x0/0x46 returned 0 after XX usecs @@ -859,9 +859,9 @@ calling init_cryptoloop+0x0/0x2f @ 1 initcall init_cryptoloop+0x0/0x2f returned 0 after XX usecs calling xlblk_init+0x0/0x81 @ 1 -blkfront: xvda1: flush diskcache: enabled initcall xlblk_init+0x0/0x81 returned 0 after XX usecs calling xen_blkif_init+0x0/0x276 @ 1 +blkfront: xvda1: flush diskcache: enabled initcall xen_blkif_init+0x0/0x276 returned 0 after XX usecs calling init_sd+0x0/0x112 @ 1 blkfront: xvda2: flush diskcache: enabled @@ -1478,6 +1478,9 @@ md: autorun ... md: ... autorun DONE. EXT3-fs (xvda1): error: couldn't mount because of unsupported optional features (240) -EXT2-fs (xvda1): error: couldn't mount because of unsupported optional features (240) +EXT2-fs (xvda1): error: couldn't mount because of unsupported optional features (244) +EXT4-fs (xvda1): INFO: recovery required on readonly filesystem +EXT4-fs (xvda1): write access will be enabled during recovery +EXT4-fs (xvda1): recovery complete EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 202:1. And just the noextraopts base log: Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.0.0-rc2 (ranma@nukunuku) (gcc version 4.5.2 (Debian 4.5.2-11) ) #53 SMP Tue Jun 14 15:33:45 CEST 2011 Command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 ACPI in unprivileged domain disabled released 0 pages of unused memory Set 0 page(s) to 1-1 mapping. BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000000000a0000 (usable) Xen: 00000000000a0000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000010000000 (usable) Xen: 0000000100000000 - 0000000100800000 (usable) NX (Execute Disable) protection: active MPS support code is not built-in. Using acpi=off or acpi=noirq or pci=noacpi may have problem DMI not present or invalid. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x100800 max_arch_pfn = 0x400000000 last_pfn = 0x10000 max_arch_pfn = 0x400000000 memblock_x86_reserve_range: [0x01ce8000-0x01cf8fff] BRK MEMBLOCK configuration: memory size = 0x10790000 memory.cnt = 0x3 memory[0x0] [0x00000000010000-0x0000000009ffff], 0x90000 bytes memory[0x1] [0x00000000100000-0x0000000fffffff], 0xff00000 bytes memory[0x2] [0x00000100000000-0x000001007fffff], 0x800000 bytes reserved.cnt = 0x3 reserved[0x0] [0x00000001000000-0x00000001cf8fff], 0xcf9000 bytes reserved[0x1] [0x00000001e1e000-0x00000001eb3fff], 0x96000 bytes reserved[0x2] [0x00000100000000-0x000001007fffff], 0x800000 bytes initial memory mapped : 0 - 01e1e000 memblock_x86_reserve_range: [0x0009e000-0x0009ffff] TRAMPOLINE Base memory trampoline at [ffff88000009e000] 9e000 size 8192 init_memory_mapping: 0000000000000000-0000000010000000 0000000000 - 0010000000 page 4k kernel direct mapping tables up to 10000000 @ ff7e000-10000000 memblock_x86_reserve_range: [0x0ff7e000-0x0ffe9fff] PGTABLE xen: setting RW the range ffea000 - 10000000 init_memory_mapping: 0000000100000000-0000000100800000 0100000000 - 0100800000 page 4k kernel direct mapping tables up to 100800000 @ f774000-ff7e000 memblock_x86_reserve_range: [0x0f774000-0x0f778fff] PGTABLE xen: setting RW the range f779000 - ff7e000 memblock_x86_reserve_range: [0x0ffff000-0x0fffffff] BOOTMEM memblock_x86_reserve_range: [0x0fb7e000-0x0ff7dfff] BOOTMEM memblock_x86_reserve_range: [0x0fffef80-0x0fffefc7] BOOTMEM memblock_x86_reserve_range: [0x0f77e000-0x0fb7dfff] BOOTMEM memblock_x86_reserve_range: [0x0f000000-0x0f5fffff] BOOTMEM memblock_x86_reserve_range: [0x0fffd000-0x0fffdfff] BOOTMEM memblock_x86_reserve_range: [0x0fffc000-0x0fffcfff] BOOTMEM memblock_x86_reserve_range: [0x0fffb000-0x0fffbfff] BOOTMEM memblock_x86_reserve_range: [0x0fffa000-0x0fffafff] BOOTMEM memblock_x86_reserve_range: [0x0fff9000-0x0fff9fff] BOOTMEM memblock_x86_free_range: [0x0f540000-0x0f5fffff] memblock_x86_free_range: [0x0f77e000-0x0fb7dfff] memblock_x86_free_range: [0x0fb7e000-0x0ff7dfff] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100800 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x000000a0 0: 0x00000100 -> 0x00010000 0: 0x00100000 -> 0x00100800 On node 0 totalpages: 67472 DMA zone: 56 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3926 pages, LIFO batch:0 memblock_x86_reserve_range: [0x0fffee00-0x0fffef7f] BOOTMEM DMA32 zone: 14280 pages used for memmap DMA32 zone: 47160 pages, LIFO batch:15 memblock_x86_reserve_range: [0x0ff66000-0x0ff7dfff] BOOTMEM Normal zone: 28 pages used for memmap Normal zone: 2020 pages, LIFO batch:0 memblock_x86_reserve_range: [0x0fffed40-0x0fffedff] BOOTMEM memblock_x86_reserve_range: [0x0fff8000-0x0fff8fff] BOOTMEM memblock_x86_reserve_range: [0x0fff7000-0x0fff7fff] BOOTMEM memblock_x86_reserve_range: [0x0fff6000-0x0fff6fff] BOOTMEM SMP: Allowing 1 CPUs, 0 hotplug CPUs No local APIC present APIC: disable apic facility APIC: switched to apic NOOP nr_irqs_gsi: 16 memblock_x86_reserve_range: [0x0fffec00-0x0fffed17] BOOTMEM memblock_x86_reserve_range: [0x0fffeb80-0x0fffebe7] BOOTMEM memblock_x86_reserve_range: [0x0fffeb00-0x0fffeb67] BOOTMEM memblock_x86_reserve_range: [0x0fffea80-0x0fffeae7] BOOTMEM memblock_x86_reserve_range: [0x0fffea00-0x0fffea67] BOOTMEM Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000) Booting paravirtualized kernel on Xen Xen version: 4.1.0 (preserve-AD) memblock_x86_reserve_range: [0x0fffe940-0x0fffe9d2] BOOTMEM memblock_x86_reserve_range: [0x0fffe880-0x0fffe912] BOOTMEM setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1 memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM memblock_x86_reserve_range: [0x0fff4000-0x0fff4fff] BOOTMEM memblock_x86_reserve_range: [0x0ff4b000-0x0ff65fff] BOOTMEM PERCPU: Embedded 27 pages/cpu @ffff88000ff4b000 s79488 r8192 d22912 u110592 memblock_x86_reserve_range: [0x0fffe840-0x0fffe847] BOOTMEM memblock_x86_reserve_range: [0x0fffe800-0x0fffe807] BOOTMEM memblock_x86_reserve_range: [0x0fffe7c0-0x0fffe7c3] BOOTMEM memblock_x86_reserve_range: [0x0fffe780-0x0fffe787] BOOTMEM pcpu-alloc: s79488 r8192 d22912 u110592 alloc=27*4096 pcpu-alloc: [0] 0 memblock_x86_reserve_range: [0x0fffe680-0x0fffe77f] BOOTMEM memblock_x86_reserve_range: [0x0fffe600-0x0fffe647] BOOTMEM memblock_x86_reserve_range: [0x0fffe580-0x0fffe5c7] BOOTMEM memblock_x86_free_range: [0x0fff5000-0x0fff5fff] memblock_x86_free_range: [0x0fff4000-0x0fff4fff] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 53106 Kernel command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 memblock_x86_reserve_range: [0x0fff4000-0x0fff5fff] BOOTMEM PID hash table entries: 1024 (order: 1, 8192 bytes) memblock_x86_reserve_range: [0x0ff0b000-0x0ff4afff] BOOTMEM Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) memblock_x86_reserve_range: [0x0feeb000-0x0ff0afff] BOOTMEM Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) memblock_x86_reserve_range: [0x0b000000-0x0effffff] BOOTMEM memblock_x86_reserve_range: [0x0fecb000-0x0feeafff] BOOTMEM memblock_x86_reserve_range: [0x0fe8b000-0x0fecafff] BOOTMEM memblock_x86_reserve_range: [0x0ffec000-0x0fff3fff] BOOTMEM Checking aperture... No AGP bridge found Subtract (23 early reservations) [000009e000-000009ffff] [0001000000-0001cf8fff] [0001e1e000-0001eb3fff] [000b000000-000f53ffff] [000f774000-000f778fff] [000fe8b000-000ffe9fff] [000ffec000-000fffdfff] [000fffe580-000fffe5c7] [000fffe600-000fffe647] [000fffe680-000fffe787] [000fffe7c0-000fffe7c3] [000fffe800-000fffe807] [000fffe840-000fffe847] [000fffe880-000fffe912] [000fffe940-000fffe9d2] [000fffea00-000fffea67] [000fffea80-000fffeae7] [000fffeb00-000fffeb67] [000fffeb80-000fffebe7] [000fffec00-000fffed17] [000fffed40-000fffefc7] [000ffff000-000fffffff] [0100000000-01007fffff] Memory: 175388k/4202496k available (6122k kernel code, 3932608k absent, 94500k reserved, 4761k data, 576k init) Hierarchical RCU implementation. NR_IRQS:320 Console: colour dummy device 80x25 console [tty0] enabled console [hvc0] enabled allocated 3145728 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Xen: using vcpuop timer interface installing Xen timer for CPU 0 Detected 2199.838 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.67 BogoMIPS (lpj=21998380) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys net_cls Initializing cgroup subsys blkio tseg: 007ff00000 SMP alternatives: switching to UP code Freeing SMP alternatives: 28k freed calling trace_init_flags_sys_exit+0x0/0x12 @ 1 initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after XX usecs calling trace_init_flags_sys_enter+0x0/0x12 @ 1 initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after XX usecs calling init_hw_perf_events+0x0/0xf1a @ 1 Performance Events: no APIC, boot with the "lapic" boot parameter to force-enable it. no hardware sampling interrupt available. Broken PMU hardware detected, using software events only. initcall init_hw_perf_events+0x0/0xf1a returned 0 after XX usecs calling register_trigger_all_cpu_backtrace+0x0/0x14 @ 1 initcall register_trigger_all_cpu_backtrace+0x0/0x14 returned 0 after XX usecs calling migration_init+0x0/0x70 @ 1 initcall migration_init+0x0/0x70 returned 0 after XX usecs calling spawn_ksoftirqd+0x0/0x55 @ 1 initcall spawn_ksoftirqd+0x0/0x55 returned 0 after XX usecs calling init_workqueues+0x0/0x2ff @ 1 initcall init_workqueues+0x0/0x2ff returned 0 after XX usecs calling init_call_single_data+0x0/0x8c @ 1 initcall init_call_single_data+0x0/0x8c returned 0 after XX usecs calling cpu_stop_init+0x0/0xaa @ 1 initcall cpu_stop_init+0x0/0xaa returned 0 after XX usecs calling rcu_spawn_kthreads+0x0/0xc9 @ 1 initcall rcu_spawn_kthreads+0x0/0xc9 returned 0 after XX usecs calling relay_init+0x0/0x14 @ 1 initcall relay_init+0x0/0x14 returned 0 after XX usecs calling tracer_alloc_buffers+0x0/0x168 @ 1 initcall tracer_alloc_buffers+0x0/0x168 returned 0 after XX usecs calling init_trace_printk+0x0/0x12 @ 1 initcall init_trace_printk+0x0/0x12 returned 0 after XX usecs NMI watchdog disabled (cpu0): hardware events not enabled Brought up 1 CPUs devtmpfs: initialized calling init_mmap_min_addr+0x0/0x16 @ 1 initcall init_mmap_min_addr+0x0/0x16 returned 0 after XX usecs calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after XX usecs calling net_ns_init+0x0/0x154 @ 1 initcall net_ns_init+0x0/0x154 returned 0 after XX usecs calling cpufreq_tsc+0x0/0x30 @ 1 initcall cpufreq_tsc+0x0/0x30 returned 0 after XX usecs calling pci_reboot_init+0x0/0x14 @ 1 initcall pci_reboot_init+0x0/0x14 returned 0 after XX usecs calling init_lapic_sysfs+0x0/0x20 @ 1 initcall init_lapic_sysfs+0x0/0x20 returned 0 after XX usecs calling init_smp_flush+0x0/0x2d @ 1 initcall init_smp_flush+0x0/0x2d returned 0 after XX usecs calling alloc_frozen_cpus+0x0/0x8 @ 1 initcall alloc_frozen_cpus+0x0/0x8 returned 0 after XX usecs calling sysctl_init+0x0/0x16 @ 1 initcall sysctl_init+0x0/0x16 returned 0 after XX usecs calling ksysfs_init+0x0/0x94 @ 1 initcall ksysfs_init+0x0/0x94 returned 0 after XX usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after XX usecs calling pm_init+0x0/0x63 @ 1 initcall pm_init+0x0/0x63 returned 0 after XX usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after XX usecs calling fsnotify_init+0x0/0x26 @ 1 initcall fsnotify_init+0x0/0x26 returned 0 after XX usecs calling filelock_init+0x0/0x2e @ 1 initcall filelock_init+0x0/0x2e returned 0 after XX usecs calling init_misc_binfmt+0x0/0x44 @ 1 initcall init_misc_binfmt+0x0/0x44 returned 0 after XX usecs calling init_script_binfmt+0x0/0x14 @ 1 initcall init_script_binfmt+0x0/0x14 returned 0 after XX usecs calling init_elf_binfmt+0x0/0x14 @ 1 initcall init_elf_binfmt+0x0/0x14 returned 0 after XX usecs calling init_compat_elf_binfmt+0x0/0x14 @ 1 initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after XX usecs calling debugfs_init+0x0/0x5c @ 1 initcall debugfs_init+0x0/0x5c returned 0 after XX usecs calling calibrate_xor_blocks+0x0/0xa0 @ 1 xor: automatically using best checksumming function: generic_sse generic_sse: 2901.200 MB/sec xor: using function: generic_sse (2901.200 MB/sec) initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after XX usecs calling random32_init+0x0/0xd8 @ 1 initcall random32_init+0x0/0xd8 returned 0 after XX usecs calling __gnttab_init+0x0/0x21 @ 1 Grant table initialized initcall __gnttab_init+0x0/0x21 returned 0 after XX usecs calling cpufreq_core_init+0x0/0xad @ 1 initcall cpufreq_core_init+0x0/0xad returned 0 after XX usecs calling cpuidle_init+0x0/0x40 @ 1 initcall cpuidle_init+0x0/0x40 returned 0 after XX usecs calling sock_init+0x0/0x83 @ 1 initcall sock_init+0x0/0x83 returned 0 after XX usecs calling netpoll_init+0x0/0x31 @ 1 initcall netpoll_init+0x0/0x31 returned 0 after XX usecs calling netlink_proto_init+0x0/0x1ad @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x1ad returned 0 after XX usecs calling bdi_class_init+0x0/0x49 @ 1 initcall bdi_class_init+0x0/0x49 returned 0 after XX usecs calling kobject_uevent_init+0x0/0x21 @ 1 initcall kobject_uevent_init+0x0/0x21 returned 0 after XX usecs calling pcibus_class_init+0x0/0x19 @ 1 initcall pcibus_class_init+0x0/0x19 returned 0 after XX usecs calling pci_driver_init+0x0/0x12 @ 1 initcall pci_driver_init+0x0/0x12 returned 0 after XX usecs calling xenbus_init+0x0/0x371 @ 1 initcall xenbus_init+0x0/0x371 returned 0 after XX usecs calling tty_class_init+0x0/0x34 @ 1 initcall tty_class_init+0x0/0x34 returned 0 after XX usecs calling vtconsole_class_init+0x0/0xeb @ 1 initcall vtconsole_class_init+0x0/0xeb returned 0 after XX usecs calling wakeup_sources_debugfs_init+0x0/0x2b @ 1 initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after XX usecs calling i2c_init+0x0/0x6f @ 1 initcall i2c_init+0x0/0x6f returned 0 after XX usecs calling amd_postcore_init+0x0/0x150 @ 1 initcall amd_postcore_init+0x0/0x150 returned 0 after XX usecs calling arch_kdebugfs_init+0x0/0x24 @ 1 initcall arch_kdebugfs_init+0x0/0x24 returned 0 after XX usecs calling configure_trampolines+0x0/0x29 @ 1 initcall configure_trampolines+0x0/0x29 returned 0 after XX usecs calling mtrr_if_init+0x0/0x64 @ 1 initcall mtrr_if_init+0x0/0x64 returned -19 after XX usecs calling ffh_cstate_init+0x0/0x2a @ 1 initcall ffh_cstate_init+0x0/0x2a returned -1 after XX usecs initcall ffh_cstate_init+0x0/0x2a returned with error code -1 calling acpi_pci_init+0x0/0x61 @ 1 initcall acpi_pci_init+0x0/0x61 returned 0 after XX usecs calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after XX usecs calling register_xen_pci_notifier+0x0/0x31 @ 1 initcall register_xen_pci_notifier+0x0/0x31 returned 0 after XX usecs calling dmi_id_init+0x0/0x30e @ 1 initcall dmi_id_init+0x0/0x30e returned -19 after XX usecs calling pci_arch_init+0x0/0x69 @ 1 PCI: setting up Xen PCI frontend stub PCI: pci_cache_line_size set to 64 bytes initcall pci_arch_init+0x0/0x69 returned 0 after XX usecs calling topology_init+0x0/0x40 @ 1 initcall topology_init+0x0/0x40 returned 0 after XX usecs calling mtrr_init_finialize+0x0/0x36 @ 1 initcall mtrr_init_finialize+0x0/0x36 returned 0 after XX usecs calling init_vdso_vars+0x0/0xf8 @ 1 initcall init_vdso_vars+0x0/0xf8 returned 0 after XX usecs calling sysenter_setup+0x0/0x2c8 @ 1 initcall sysenter_setup+0x0/0x2c8 returned 0 after XX usecs calling param_sysfs_init+0x0/0x1b4 @ 1 initcall param_sysfs_init+0x0/0x1b4 returned 0 after XX usecs calling pm_sysrq_init+0x0/0x19 @ 1 initcall pm_sysrq_init+0x0/0x19 returned 0 after XX usecs calling default_bdi_init+0x0/0xa9 @ 1 initcall default_bdi_init+0x0/0xa9 returned 0 after XX usecs calling init_bio+0x0/0xe5 @ 1 bio: create slab <bio-0> at 0 initcall init_bio+0x0/0xe5 returned 0 after XX usecs calling fsnotify_notification_init+0x0/0x8b @ 1 initcall fsnotify_notification_init+0x0/0x8b returned 0 after XX usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after XX usecs calling blk_settings_init+0x0/0x2a @ 1 initcall blk_settings_init+0x0/0x2a returned 0 after XX usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after XX usecs calling blk_softirq_init+0x0/0x6e @ 1 initcall blk_softirq_init+0x0/0x6e returned 0 after XX usecs calling blk_iopoll_setup+0x0/0x6e @ 1 initcall blk_iopoll_setup+0x0/0x6e returned 0 after XX usecs calling genhd_device_init+0x0/0x7c @ 1 initcall genhd_device_init+0x0/0x7c returned 0 after XX usecs calling raid6_select_algo+0x0/0x1bd @ 1 raid6: int64x1 2032 MB/s raid6: int64x2 2398 MB/s raid6: int64x4 1711 MB/s raid6: int64x8 1243 MB/s raid6: sse2x1 1750 MB/s raid6: sse2x2 2362 MB/s raid6: sse2x4 1807 MB/s raid6: using algorithm sse2x2 (2362 MB/s) initcall raid6_select_algo+0x0/0x1bd returned 0 after XX usecs calling pci_slot_init+0x0/0x46 @ 1 initcall pci_slot_init+0x0/0x46 returned 0 after XX usecs calling acpi_init+0x0/0xb6 @ 1 ACPI: Interpreter disabled. initcall acpi_init+0x0/0xb6 returned -19 after XX usecs calling dock_init+0x0/0xa5 @ 1 initcall dock_init+0x0/0xa5 returned 0 after XX usecs calling acpi_pci_root_init+0x0/0x28 @ 1 initcall acpi_pci_root_init+0x0/0x28 returned 0 after XX usecs calling acpi_pci_link_init+0x0/0x3e @ 1 initcall acpi_pci_link_init+0x0/0x3e returned 0 after XX usecs calling pnp_init+0x0/0x12 @ 1 initcall pnp_init+0x0/0x12 returned 0 after XX usecs calling xen_setup_shutdown_event+0x0/0x22 @ 1 initcall xen_setup_shutdown_event+0x0/0x22 returned 0 after XX usecs calling balloon_init+0x0/0x130 @ 1 xen/balloon: Initialising balloon driver. last_pfn = 0x100800 max_arch_pfn = 0x400000000 initcall balloon_init+0x0/0x130 returned 0 after XX usecs calling xenbus_probe_backend_init+0x0/0x2d @ 1 initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after XX usecs calling xenbus_probe_frontend_init+0x0/0x2d @ 1 initcall xenbus_probe_frontend_init+0x0/0x2d returned 0 after XX usecs calling balloon_init+0x0/0x100 @ 1 xen-balloon: Initialising balloon driver. initcall balloon_init+0x0/0x100 returned 0 after XX usecs calling misc_init+0x0/0xb7 @ 1 initcall misc_init+0x0/0xb7 returned 0 after XX usecs calling vga_arb_device_init+0x0/0xe4 @ 1 vgaarb: loaded initcall vga_arb_device_init+0x0/0xe4 returned 0 after XX usecs calling init_scsi+0x0/0x7c @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x7c returned 0 after XX usecs calling ata_init+0x0/0x349 @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x349 returned 0 after XX usecs calling usb_init+0x0/0x15f @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x15f returned 0 after XX usecs calling serio_init+0x0/0x31 @ 1 initcall serio_init+0x0/0x31 returned 0 after XX usecs calling input_init+0x0/0x10c @ 1 initcall input_init+0x0/0x10c returned 0 after XX usecs calling rtc_init+0x0/0x6a @ 1 initcall rtc_init+0x0/0x6a returned 0 after XX usecs calling power_supply_class_init+0x0/0x40 @ 1 initcall power_supply_class_init+0x0/0x40 returned 0 after XX usecs calling hwmon_init+0x0/0xee @ 1 initcall hwmon_init+0x0/0xee returned 0 after XX usecs calling md_init+0x0/0x144 @ 1 initcall md_init+0x0/0x144 returned 0 after XX usecs calling init_soundcore+0x0/0x34 @ 1 initcall init_soundcore+0x0/0x34 returned 0 after XX usecs calling alsa_sound_init+0x0/0x90 @ 1 Advanced Linux Sound Architecture Driver Version 1.0.24. initcall alsa_sound_init+0x0/0x90 returned 0 after XX usecs calling pci_subsys_init+0x0/0x4d @ 1 PCI: System does not support PCI PCI: System does not support PCI initcall pci_subsys_init+0x0/0x4d returned 0 after XX usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after XX usecs calling net_dev_init+0x0/0x1d9 @ 1 initcall net_dev_init+0x0/0x1d9 returned 0 after XX usecs calling neigh_init+0x0/0x71 @ 1 initcall neigh_init+0x0/0x71 returned 0 after XX usecs calling fib_rules_init+0x0/0xa6 @ 1 initcall fib_rules_init+0x0/0xa6 returned 0 after XX usecs calling pktsched_init+0x0/0xed @ 1 initcall pktsched_init+0x0/0xed returned 0 after XX usecs calling tc_filter_init+0x0/0x4c @ 1 initcall tc_filter_init+0x0/0x4c returned 0 after XX usecs calling tc_action_init+0x0/0x4c @ 1 initcall tc_action_init+0x0/0x4c returned 0 after XX usecs calling genl_init+0x0/0x93 @ 1 initcall genl_init+0x0/0x93 returned 0 after XX usecs calling sysctl_init+0x0/0x48 @ 1 initcall sysctl_init+0x0/0x48 returned 0 after XX usecs calling print_ICs+0x0/0x510 @ 1 initcall print_ICs+0x0/0x510 returned 0 after XX usecs calling hpet_late_init+0x0/0xf4 @ 1 initcall hpet_late_init+0x0/0xf4 returned -19 after XX usecs calling init_amd_nbs+0x0/0xba @ 1 initcall init_amd_nbs+0x0/0xba returned 0 after XX usecs calling clocksource_done_booting+0x0/0x5a @ 1 Switching to clocksource xen initcall clocksource_done_booting+0x0/0x5a returned 0 after XX usecs calling rb_init_debugfs+0x0/0x2f @ 1 initcall rb_init_debugfs+0x0/0x2f returned 0 after XX usecs calling tracer_init_debugfs+0x0/0x36b @ 1 initcall tracer_init_debugfs+0x0/0x36b returned 0 after XX usecs calling init_trace_printk_function_export+0x0/0x2f @ 1 initcall init_trace_printk_function_export+0x0/0x2f returned 0 after XX usecs calling event_trace_init+0x0/0x2bd @ 1 initcall event_trace_init+0x0/0x2bd returned 0 after XX usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after XX usecs calling eventpoll_init+0x0/0xda @ 1 initcall eventpoll_init+0x0/0xda returned 0 after XX usecs calling anon_inode_init+0x0/0x12e @ 1 initcall anon_inode_init+0x0/0x12e returned 0 after XX usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after XX usecs calling acpi_event_init+0x0/0x52 @ 1 initcall acpi_event_init+0x0/0x52 returned 0 after XX usecs calling pnp_system_init+0x0/0x12 @ 1 initcall pnp_system_init+0x0/0x12 returned 0 after XX usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI: disabled initcall pnpacpi_init+0x0/0x8c returned 0 after XX usecs calling chr_dev_init+0x0/0xc1 @ 1 Switched to NOHz mode on CPU #0 initcall chr_dev_init+0x0/0xc1 returned 0 after XX usecs calling firmware_class_init+0x0/0x19 @ 1 initcall firmware_class_init+0x0/0x19 returned 0 after XX usecs calling thermal_init+0x0/0x75 @ 1 initcall thermal_init+0x0/0x75 returned 0 after XX usecs calling cpufreq_gov_performance_init+0x0/0x12 @ 1 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after XX usecs calling init_acpi_pm_clocksource+0x0/0xe0 @ 1 initcall init_acpi_pm_clocksource+0x0/0xe0 returned -19 after XX usecs calling pcibios_assign_resources+0x0/0x74 @ 1 PCI: max bus depth: 0 pci_try_num: 1 initcall pcibios_assign_resources+0x0/0x74 returned 0 after XX usecs calling sysctl_core_init+0x0/0x38 @ 1 initcall sysctl_core_init+0x0/0x38 returned 0 after XX usecs calling inet_init+0x0/0x286 @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 2, 16384 bytes) TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) initcall inet_init+0x0/0x286 returned 0 after XX usecs calling af_unix_init+0x0/0x55 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after XX usecs calling init_sunrpc+0x0/0x73 @ 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x73 returned 0 after XX usecs calling pci_apply_final_quirks+0x0/0x106 @ 1 PCI: CLS 0 bytes, default 64 initcall pci_apply_final_quirks+0x0/0x106 returned 0 after XX usecs calling populate_rootfs+0x0/0x9e @ 1 initcall populate_rootfs+0x0/0x9e returned 0 after XX usecs calling pci_iommu_init+0x0/0x41 @ 1 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff88000b000000 - ffff88000f000000 software IO TLB at phys 0xb000000 - 0xf000000 initcall pci_iommu_init+0x0/0x41 returned 0 after XX usecs calling irqfd_module_init+0x0/0x31 @ 1 initcall irqfd_module_init+0x0/0x31 returned 0 after XX usecs calling svm_init+0x0/0x1e @ 1 has_svm: svm not available kvm: no hardware support initcall svm_init+0x0/0x1e returned -95 after XX usecs initcall svm_init+0x0/0x1e returned with error code -95 calling i8259A_init_ops+0x0/0x21 @ 1 initcall i8259A_init_ops+0x0/0x21 returned 0 after XX usecs calling vsyscall_init+0x0/0x66 @ 1 initcall vsyscall_init+0x0/0x66 returned 0 after XX usecs calling sbf_init+0x0/0xe9 @ 1 initcall sbf_init+0x0/0xe9 returned 0 after XX usecs calling init_tsc_clocksource+0x0/0x5f @ 1 initcall init_tsc_clocksource+0x0/0x5f returned 0 after XX usecs calling add_rtc_cmos+0x0/0x97 @ 1 platform rtc_cmos: registered platform RTC device (no PNP device found) initcall add_rtc_cmos+0x0/0x97 returned 0 after XX usecs calling i8237A_init_ops+0x0/0x14 @ 1 initcall i8237A_init_ops+0x0/0x14 returned 0 after XX usecs calling cache_sysfs_init+0x0/0x64 @ 1 initcall cache_sysfs_init+0x0/0x64 returned 0 after XX usecs calling mcheck_init_device+0x0/0x100 @ 1 initcall mcheck_init_device+0x0/0x100 returned -5 after XX usecs initcall mcheck_init_device+0x0/0x100 returned with error code -5 calling threshold_init_device+0x0/0x4f @ 1 initcall threshold_init_device+0x0/0x4f returned 0 after XX usecs calling thermal_throttle_init_device+0x0/0x9b @ 1 initcall thermal_throttle_init_device+0x0/0x9b returned 0 after XX usecs calling ioapic_init_ops+0x0/0x14 @ 1 initcall ioapic_init_ops+0x0/0x14 returned 0 after XX usecs calling add_pcspkr+0x0/0x3a @ 1 initcall add_pcspkr+0x0/0x3a returned 0 after XX usecs calling aes_init+0x0/0x12 @ 1 initcall aes_init+0x0/0x12 returned 0 after XX usecs calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after XX usecs calling ia32_binfmt_init+0x0/0x14 @ 1 initcall ia32_binfmt_init+0x0/0x14 returned 0 after XX usecs calling init_sched_debug_procfs+0x0/0x2c @ 1 initcall init_sched_debug_procfs+0x0/0x2c returned 0 after XX usecs calling proc_schedstat_init+0x0/0x22 @ 1 initcall proc_schedstat_init+0x0/0x22 returned 0 after XX usecs calling proc_execdomains_init+0x0/0x22 @ 1 initcall proc_execdomains_init+0x0/0x22 returned 0 after XX usecs calling ioresources_init+0x0/0x3c @ 1 initcall ioresources_init+0x0/0x3c returned 0 after XX usecs calling uid_cache_init+0x0/0x8d @ 1 initcall uid_cache_init+0x0/0x8d returned 0 after XX usecs calling init_posix_timers+0x0/0x1cf @ 1 initcall init_posix_timers+0x0/0x1cf returned 0 after XX usecs calling init_posix_cpu_timers+0x0/0xbf @ 1 initcall init_posix_cpu_timers+0x0/0xbf returned 0 after XX usecs calling nsproxy_cache_init+0x0/0x2d @ 1 initcall nsproxy_cache_init+0x0/0x2d returned 0 after XX usecs calling timekeeping_init_ops+0x0/0x14 @ 1 initcall timekeeping_init_ops+0x0/0x14 returned 0 after XX usecs calling init_clocksource_sysfs+0x0/0x50 @ 1 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after XX usecs calling init_timer_list_procfs+0x0/0x2c @ 1 initcall init_timer_list_procfs+0x0/0x2c returned 0 after XX usecs calling alarmtimer_init+0x0/0x147 @ 1 initcall alarmtimer_init+0x0/0x147 returned 0 after XX usecs calling init_tstats_procfs+0x0/0x2c @ 1 initcall init_tstats_procfs+0x0/0x2c returned 0 after XX usecs calling futex_init+0x0/0x5d @ 1 initcall futex_init+0x0/0x5d returned 0 after XX usecs calling proc_dma_init+0x0/0x22 @ 1 initcall proc_dma_init+0x0/0x22 returned 0 after XX usecs calling proc_modules_init+0x0/0x22 @ 1 initcall proc_modules_init+0x0/0x22 returned 0 after XX usecs calling kallsyms_init+0x0/0x25 @ 1 initcall kallsyms_init+0x0/0x25 returned 0 after XX usecs calling ikconfig_init+0x0/0x3a @ 1 initcall ikconfig_init+0x0/0x3a returned 0 after XX usecs calling hung_task_init+0x0/0x56 @ 1 initcall hung_task_init+0x0/0x56 returned 0 after XX usecs calling utsname_sysctl_init+0x0/0x14 @ 1 initcall utsname_sysctl_init+0x0/0x14 returned 0 after XX usecs calling init_tracepoints+0x0/0x12 @ 1 initcall init_tracepoints+0x0/0x12 returned 0 after XX usecs calling init_lstats_procfs+0x0/0x25 @ 1 initcall init_lstats_procfs+0x0/0x25 returned 0 after XX usecs calling init_events+0x0/0x61 @ 1 initcall init_events+0x0/0x61 returned 0 after XX usecs calling init_mmio_trace+0x0/0x12 @ 1 initcall init_mmio_trace+0x0/0x12 returned 0 after XX usecs calling init_blk_tracer+0x0/0x55 @ 1 initcall init_blk_tracer+0x0/0x55 returned 0 after XX usecs calling perf_event_sysfs_init+0x0/0x93 @ 1 initcall perf_event_sysfs_init+0x0/0x93 returned 0 after XX usecs calling init_per_zone_wmark_min+0x0/0x88 @ 1 initcall init_per_zone_wmark_min+0x0/0x88 returned 0 after XX usecs calling kswapd_init+0x0/0x20 @ 1 initcall kswapd_init+0x0/0x20 returned 0 after XX usecs calling extfrag_debug_init+0x0/0x7b @ 1 initcall extfrag_debug_init+0x0/0x7b returned 0 after XX usecs calling setup_vmstat+0x0/0xc0 @ 1 initcall setup_vmstat+0x0/0xc0 returned 0 after XX usecs calling mm_sysfs_init+0x0/0x29 @ 1 initcall mm_sysfs_init+0x0/0x29 returned 0 after XX usecs calling proc_vmalloc_init+0x0/0x25 @ 1 initcall proc_vmalloc_init+0x0/0x25 returned 0 after XX usecs calling procswaps_init+0x0/0x22 @ 1 initcall procswaps_init+0x0/0x22 returned 0 after XX usecs calling hugetlb_init+0x0/0x3db @ 1 HugeTLB registered 2 MB page size, pre-allocated 0 pages initcall hugetlb_init+0x0/0x3db returned 0 after XX usecs calling slab_proc_init+0x0/0x25 @ 1 initcall slab_proc_init+0x0/0x25 returned 0 after XX usecs calling cpucache_init+0x0/0x40 @ 1 initcall cpucache_init+0x0/0x40 returned 0 after XX usecs calling hugepage_init+0x0/0x12a @ 1 initcall hugepage_init+0x0/0x12a returned -22 after XX usecs initcall hugepage_init+0x0/0x12a returned with error code -22 calling init_cleancache+0x0/0x1b @ 1 initcall init_cleancache+0x0/0x1b returned 0 after XX usecs calling fcntl_init+0x0/0x2a @ 1 initcall fcntl_init+0x0/0x2a returned 0 after XX usecs calling proc_filesystems_init+0x0/0x22 @ 1 initcall proc_filesystems_init+0x0/0x22 returned 0 after XX usecs calling fsnotify_mark_init+0x0/0x40 @ 1 initcall fsnotify_mark_init+0x0/0x40 returned 0 after XX usecs calling dnotify_init+0x0/0x7b @ 1 initcall dnotify_init+0x0/0x7b returned 0 after XX usecs calling inotify_user_setup+0x0/0x70 @ 1 initcall inotify_user_setup+0x0/0x70 returned 0 after XX usecs calling aio_setup+0x0/0x78 @ 1 initcall aio_setup+0x0/0x78 returned 0 after XX usecs calling proc_locks_init+0x0/0x22 @ 1 initcall proc_locks_init+0x0/0x22 returned 0 after XX usecs calling init_sys32_ioctl+0x0/0x28 @ 1 initcall init_sys32_ioctl+0x0/0x28 returned 0 after XX usecs calling init_mbcache+0x0/0x14 @ 1 initcall init_mbcache+0x0/0x14 returned 0 after XX usecs calling proc_cmdline_init+0x0/0x22 @ 1 initcall proc_cmdline_init+0x0/0x22 returned 0 after XX usecs calling proc_consoles_init+0x0/0x22 @ 1 initcall proc_consoles_init+0x0/0x22 returned 0 after XX usecs calling proc_cpuinfo_init+0x0/0x22 @ 1 initcall proc_cpuinfo_init+0x0/0x22 returned 0 after XX usecs calling proc_devices_init+0x0/0x22 @ 1 initcall proc_devices_init+0x0/0x22 returned 0 after XX usecs calling proc_interrupts_init+0x0/0x22 @ 1 initcall proc_interrupts_init+0x0/0x22 returned 0 after XX usecs calling proc_loadavg_init+0x0/0x22 @ 1 initcall proc_loadavg_init+0x0/0x22 returned 0 after XX usecs calling proc_meminfo_init+0x0/0x22 @ 1 initcall proc_meminfo_init+0x0/0x22 returned 0 after XX usecs calling proc_stat_init+0x0/0x22 @ 1 initcall proc_stat_init+0x0/0x22 returned 0 after XX usecs calling proc_uptime_init+0x0/0x22 @ 1 initcall proc_uptime_init+0x0/0x22 returned 0 after XX usecs calling proc_version_init+0x0/0x22 @ 1 initcall proc_version_init+0x0/0x22 returned 0 after XX usecs calling proc_softirqs_init+0x0/0x22 @ 1 initcall proc_softirqs_init+0x0/0x22 returned 0 after XX usecs calling proc_kcore_init+0x0/0xa9 @ 1 initcall proc_kcore_init+0x0/0xa9 returned 0 after XX usecs calling proc_kmsg_init+0x0/0x25 @ 1 initcall proc_kmsg_init+0x0/0x25 returned 0 after XX usecs calling proc_page_init+0x0/0x42 @ 1 initcall proc_page_init+0x0/0x42 returned 0 after XX usecs calling configfs_init+0x0/0xb3 @ 1 initcall configfs_init+0x0/0xb3 returned 0 after XX usecs calling init_devpts_fs+0x0/0x4c @ 1 initcall init_devpts_fs+0x0/0x4c returned 0 after XX usecs calling init_ext3_fs+0x0/0x6f @ 1 initcall init_ext3_fs+0x0/0x6f returned 0 after XX usecs calling init_ext2_fs+0x0/0x6f @ 1 initcall init_ext2_fs+0x0/0x6f returned 0 after XX usecs calling ext4_init_fs+0x0/0x20c @ 1 initcall ext4_init_fs+0x0/0x20c returned 0 after XX usecs calling journal_init+0x0/0x97 @ 1 initcall journal_init+0x0/0x97 returned 0 after XX usecs calling journal_init+0x0/0x104 @ 1 initcall journal_init+0x0/0x104 returned 0 after XX usecs calling init_squashfs_fs+0x0/0x66 @ 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher initcall init_squashfs_fs+0x0/0x66 returned 0 after XX usecs calling init_ramfs_fs+0x0/0x12 @ 1 initcall init_ramfs_fs+0x0/0x12 returned 0 after XX usecs calling init_hugetlbfs_fs+0x0/0x98 @ 1 initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after XX usecs calling init_fat_fs+0x0/0x4f @ 1 initcall init_fat_fs+0x0/0x4f returned 0 after XX usecs calling init_vfat_fs+0x0/0x12 @ 1 initcall init_vfat_fs+0x0/0x12 returned 0 after XX usecs calling init_iso9660_fs+0x0/0x5c @ 1 initcall init_iso9660_fs+0x0/0x5c returned 0 after XX usecs calling init_nfs_fs+0x0/0x10e @ 1 initcall init_nfs_fs+0x0/0x10e returned 0 after XX usecs calling init_nfsd+0x0/0xbb @ 1 Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). initcall init_nfsd+0x0/0xbb returned 0 after XX usecs calling init_nlm+0x0/0x22 @ 1 initcall init_nlm+0x0/0x22 returned 0 after XX usecs calling init_nls_cp437+0x0/0x12 @ 1 initcall init_nls_cp437+0x0/0x12 returned 0 after XX usecs calling init_nls_cp850+0x0/0x12 @ 1 initcall init_nls_cp850+0x0/0x12 returned 0 after XX usecs calling init_nls_cp932+0x0/0x12 @ 1 initcall init_nls_cp932+0x0/0x12 returned 0 after XX usecs calling init_nls_euc_jp+0x0/0x48 @ 1 initcall init_nls_euc_jp+0x0/0x48 returned 0 after XX usecs calling init_nls_iso8859_1+0x0/0x12 @ 1 initcall init_nls_iso8859_1+0x0/0x12 returned 0 after XX usecs calling init_nls_iso8859_15+0x0/0x12 @ 1 initcall init_nls_iso8859_15+0x0/0x12 returned 0 after XX usecs calling init_nls_utf8+0x0/0x29 @ 1 initcall init_nls_utf8+0x0/0x29 returned 0 after XX usecs calling init_ntfs_fs+0x0/0x1d1 @ 1 NTFS driver 2.1.30 [Flags: R/W]. initcall init_ntfs_fs+0x0/0x1d1 returned 0 after XX usecs calling init_autofs4_fs+0x0/0x26 @ 1 initcall init_autofs4_fs+0x0/0x26 returned 0 after XX usecs calling fuse_init+0x0/0x141 @ 1 fuse init (API version 7.16) initcall fuse_init+0x0/0x141 returned 0 after XX usecs calling init_udf_fs+0x0/0x5c @ 1 initcall init_udf_fs+0x0/0x5c returned 0 after XX usecs calling init_xfs_fs+0x0/0xa9 @ 1 SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled initcall init_xfs_fs+0x0/0xa9 returned 0 after XX usecs calling ipc_init+0x0/0x23 @ 1 msgmni has been set to 342 initcall ipc_init+0x0/0x23 returned 0 after XX usecs calling ipc_sysctl_init+0x0/0x14 @ 1 initcall ipc_sysctl_init+0x0/0x14 returned 0 after XX usecs calling key_proc_init+0x0/0x33 @ 1 initcall key_proc_init+0x0/0x33 returned 0 after XX usecs calling crypto_wq_init+0x0/0x31 @ 1 initcall crypto_wq_init+0x0/0x31 returned 0 after XX usecs calling crypto_algapi_init+0x0/0xd @ 1 initcall crypto_algapi_init+0x0/0xd returned 0 after XX usecs calling skcipher_module_init+0x0/0x36 @ 1 initcall skcipher_module_init+0x0/0x36 returned 0 after XX usecs calling chainiv_module_init+0x0/0x12 @ 1 initcall chainiv_module_init+0x0/0x12 returned 0 after XX usecs calling eseqiv_module_init+0x0/0x12 @ 1 initcall eseqiv_module_init+0x0/0x12 returned 0 after XX usecs calling seqiv_module_init+0x0/0x12 @ 1 initcall seqiv_module_init+0x0/0x12 returned 0 after XX usecs calling hmac_module_init+0x0/0x12 @ 1 initcall hmac_module_init+0x0/0x12 returned 0 after XX usecs calling md5_mod_init+0x0/0x12 @ 1 initcall md5_mod_init+0x0/0x12 returned 0 after XX usecs calling sha1_generic_mod_init+0x0/0x12 @ 1 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after XX usecs calling sha256_generic_mod_init+0x0/0x3f @ 1 initcall sha256_generic_mod_init+0x0/0x3f returned 0 after XX usecs calling crypto_cbc_module_init+0x0/0x12 @ 1 initcall crypto_cbc_module_init+0x0/0x12 returned 0 after XX usecs calling crypto_ctr_module_init+0x0/0x3e @ 1 initcall crypto_ctr_module_init+0x0/0x3e returned 0 after XX usecs calling cryptd_init+0x0/0xc5 @ 1 initcall cryptd_init+0x0/0xc5 returned 0 after XX usecs calling des_generic_mod_init+0x0/0x3f @ 1 initcall des_generic_mod_init+0x0/0x3f returned 0 after XX usecs calling blowfish_mod_init+0x0/0x12 @ 1 initcall blowfish_mod_init+0x0/0x12 returned 0 after XX usecs calling aes_init+0x0/0x12 @ 1 initcall aes_init+0x0/0x12 returned 0 after XX usecs calling krng_mod_init+0x0/0x12 @ 1 initcall krng_mod_init+0x0/0x12 returned 0 after XX usecs calling async_pq_init+0x0/0x44 @ 1 initcall async_pq_init+0x0/0x44 returned 0 after XX usecs calling proc_genhd_init+0x0/0x3c @ 1 initcall proc_genhd_init+0x0/0x3c returned 0 after XX usecs calling init_cgroup_blkio+0x0/0x12 @ 1 initcall init_cgroup_blkio+0x0/0x12 returned 0 after XX usecs calling throtl_init+0x0/0x44 @ 1 initcall throtl_init+0x0/0x44 returned 0 after XX usecs calling noop_init+0x0/0x14 @ 1 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after XX usecs calling deadline_init+0x0/0x14 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after XX usecs calling cfq_init+0x0/0xb3 @ 1 io scheduler cfq registered (default) initcall cfq_init+0x0/0xb3 returned 0 after XX usecs calling init_kmp+0x0/0x12 @ 1 initcall init_kmp+0x0/0x12 returned 0 after XX usecs calling init_bm+0x0/0x12 @ 1 initcall init_bm+0x0/0x12 returned 0 after XX usecs calling init_fsm+0x0/0x12 @ 1 initcall init_fsm+0x0/0x12 returned 0 after XX usecs calling percpu_counter_startup+0x0/0x19 @ 1 initcall percpu_counter_startup+0x0/0x19 returned 0 after XX usecs calling pci_proc_init+0x0/0x6b @ 1 initcall pci_proc_init+0x0/0x6b returned 0 after XX usecs calling pcie_portdrv_init+0x0/0x7a @ 1 initcall pcie_portdrv_init+0x0/0x7a returned 0 after XX usecs calling aer_service_init+0x0/0x22 @ 1 initcall aer_service_init+0x0/0x22 returned 0 after XX usecs calling pcie_pme_service_init+0x0/0x12 @ 1 initcall pcie_pme_service_init+0x0/0x12 returned 0 after XX usecs calling ioapic_init+0x0/0x1b @ 1 initcall ioapic_init+0x0/0x1b returned 0 after XX usecs calling pcifront_init+0x0/0x5c @ 1 initcall pcifront_init+0x0/0x5c returned 0 after XX usecs calling acpi_reserve_resources+0x0/0xeb @ 1 initcall acpi_reserve_resources+0x0/0xeb returned 0 after XX usecs calling irqrouter_init_ops+0x0/0x26 @ 1 initcall irqrouter_init_ops+0x0/0x26 returned 0 after XX usecs calling acpi_button_init+0x0/0x12 @ 1 initcall acpi_button_init+0x0/0x12 returned -19 after XX usecs calling acpi_fan_init+0x0/0x18 @ 1 initcall acpi_fan_init+0x0/0x18 returned -19 after XX usecs calling acpi_pci_slot_init+0x0/0x20 @ 1 initcall acpi_pci_slot_init+0x0/0x20 returned 0 after XX usecs calling acpi_processor_init+0x0/0xcd @ 1 initcall acpi_processor_init+0x0/0xcd returned 0 after XX usecs calling acpi_container_init+0x0/0x4a @ 1 initcall acpi_container_init+0x0/0x4a returned -19 after XX usecs calling acpi_thermal_init+0x0/0x42 @ 1 initcall acpi_thermal_init+0x0/0x42 returned -19 after XX usecs calling xenbus_probe_initcall+0x0/0x3b @ 1 initcall xenbus_probe_initcall+0x0/0x3b returned 0 after XX usecs calling xen_tmem_init+0x0/0x5c @ 1 initcall xen_tmem_init+0x0/0x5c returned 0 after XX usecs calling evtchn_init+0x0/0x6e @ 1 Event-channel device installed. initcall evtchn_init+0x0/0x6e returned 0 after XX usecs calling xenfs_init+0x0/0x2d @ 1 initcall xenfs_init+0x0/0x2d returned 0 after XX usecs calling hypervisor_subsys_init+0x0/0x25 @ 1 initcall hypervisor_subsys_init+0x0/0x25 returned 0 after XX usecs calling hyper_sysfs_init+0x0/0xbf @ 1 initcall hyper_sysfs_init+0x0/0xbf returned 0 after XX usecs calling pty_init+0x0/0x26a @ 1 initcall pty_init+0x0/0x26a returned 0 after XX usecs calling sysrq_init+0x0/0x68 @ 1 initcall sysrq_init+0x0/0x68 returned 0 after XX usecs calling xen_hvc_init+0x0/0x144 @ 1 initcall xen_hvc_init+0x0/0x144 returned 0 after XX usecs calling serial8250_init+0x0/0x18e @ 1 Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled initcall serial8250_init+0x0/0x18e returned 0 after XX usecs calling serial8250_pnp_init+0x0/0x12 @ 1 initcall serial8250_pnp_init+0x0/0x12 returned 0 after XX usecs calling serial8250_pci_init+0x0/0x1b @ 1 initcall serial8250_pci_init+0x0/0x1b returned 0 after XX usecs calling rand_initialize+0x0/0x2c @ 1 initcall rand_initialize+0x0/0x2c returned 0 after XX usecs calling hpet_init+0x0/0x6a @ 1 initcall hpet_init+0x0/0x6a returned -19 after XX usecs calling topology_sysfs_init+0x0/0x50 @ 1 initcall topology_sysfs_init+0x0/0x50 returned 0 after XX usecs calling loop_init+0x0/0x231 @ 1 loop: module loaded initcall loop_init+0x0/0x231 returned 0 after XX usecs calling init_cryptoloop+0x0/0x2f @ 1 initcall init_cryptoloop+0x0/0x2f returned 0 after XX usecs calling xlblk_init+0x0/0x81 @ 1 blkfront: xvda1: flush diskcache: enabled initcall xlblk_init+0x0/0x81 returned 0 after XX usecs calling xen_blkif_init+0x0/0x276 @ 1 initcall xen_blkif_init+0x0/0x276 returned 0 after XX usecs calling init_sd+0x0/0x112 @ 1 blkfront: xvda2: flush diskcache: enabled initcall init_sd+0x0/0x112 returned 0 after XX usecs calling init_sr+0x0/0x46 @ 1 initcall init_sr+0x0/0x46 returned 0 after XX usecs calling init_sg+0x0/0xc7 @ 1 initcall init_sg+0x0/0xc7 returned 0 after XX usecs calling ahci_init+0x0/0x1b @ 1 initcall ahci_init+0x0/0x1b returned 0 after XX usecs calling piix_init+0x0/0x29 @ 1 initcall piix_init+0x0/0x29 returned 0 after XX usecs calling mv_init+0x0/0x45 @ 1 initcall mv_init+0x0/0x45 returned 0 after XX usecs calling nv_init+0x0/0x1b @ 1 initcall nv_init+0x0/0x1b returned 0 after XX usecs calling svia_init+0x0/0x1b @ 1 initcall svia_init+0x0/0x1b returned 0 after XX usecs calling amd_init+0x0/0x1b @ 1 initcall amd_init+0x0/0x1b returned 0 after XX usecs calling pdc2027x_init+0x0/0x1b @ 1 initcall pdc2027x_init+0x0/0x1b returned 0 after XX usecs calling sil680_init+0x0/0x1b @ 1 initcall sil680_init+0x0/0x1b returned 0 after XX usecs calling via_init+0x0/0x1b @ 1 initcall via_init+0x0/0x1b returned 0 after XX usecs calling e1000_init_module+0x0/0x87 @ 1 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. initcall e1000_init_module+0x0/0x87 returned 0 after XX usecs calling e1000_init_module+0x0/0x3e @ 1 e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 e1000e: Copyright(c) 1999 - 2011 Intel Corporation. initcall e1000_init_module+0x0/0x3e returned 0 after XX usecs calling e100_init_module+0x0/0x5d @ 1 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation initcall e100_init_module+0x0/0x5d returned 0 after XX usecs calling net_olddevs_init+0x0/0x9e @ 1 initcall net_olddevs_init+0x0/0x9e returned 0 after XX usecs calling ppp_init+0x0/0xe4 @ 1 PPP generic driver version 2.4.2 initcall ppp_init+0x0/0xe4 returned 0 after XX usecs calling ppp_async_init+0x0/0x36 @ 1 initcall ppp_async_init+0x0/0x36 returned 0 after XX usecs calling ppp_sync_init+0x0/0x36 @ 1 initcall ppp_sync_init+0x0/0x36 returned 0 after XX usecs calling deflate_init+0x0/0x3b @ 1 PPP Deflate Compression module registered initcall deflate_init+0x0/0x3b returned 0 after XX usecs calling bsdcomp_init+0x0/0x2f @ 1 PPP BSD Compression module registered initcall bsdcomp_init+0x0/0x2f returned 0 after XX usecs calling pppox_init+0x0/0x12 @ 1 NET: Registered protocol family 24 initcall pppox_init+0x0/0x12 returned 0 after XX usecs calling pppoe_init+0x0/0x87 @ 1 initcall pppoe_init+0x0/0x87 returned 0 after XX usecs calling netif_init+0x0/0x66 @ 1 Initialising Xen virtual ethernet driver. initcall netif_init+0x0/0x66 returned 0 after XX usecs calling netback_init+0x0/0x219 @ 1 initcall netback_init+0x0/0x219 returned 0 after XX usecs calling dummy_init_module+0x0/0xaa @ 1 initcall dummy_init_module+0x0/0xaa returned 0 after XX usecs calling ifb_init_module+0x0/0xad @ 1 initcall ifb_init_module+0x0/0xad returned 0 after XX usecs calling cp_init+0x0/0x1b @ 1 initcall cp_init+0x0/0x1b returned 0 after XX usecs calling rtl8139_init_module+0x0/0x1b @ 1 initcall rtl8139_init_module+0x0/0x1b returned 0 after XX usecs calling tun_init+0x0/0x93 @ 1 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> initcall tun_init+0x0/0x93 returned 0 after XX usecs calling rtl8169_init_module+0x0/0x1b @ 1 initcall rtl8169_init_module+0x0/0x1b returned 0 after XX usecs calling cdc_init+0x0/0x1b @ 1 usbcore: registered new interface driver cdc_ether initcall cdc_init+0x0/0x1b returned 0 after XX usecs calling cdc_subset_init+0x0/0x1b @ 1 usbcore: registered new interface driver cdc_subset initcall cdc_subset_init+0x0/0x1b returned 0 after XX usecs calling zaurus_init+0x0/0x1b @ 1 usbcore: registered new interface driver zaurus initcall zaurus_init+0x0/0x1b returned 0 after XX usecs calling usbnet_init+0x0/0x2b @ 1 initcall usbnet_init+0x0/0x2b returned 0 after XX usecs calling cdc_ncm_init+0x0/0x29 @ 1 cdc_ncm: 01-June-2011 usbcore: registered new interface driver cdc_ncm initcall cdc_ncm_init+0x0/0x29 returned 0 after XX usecs calling de_init+0x0/0x1b @ 1 initcall de_init+0x0/0x1b returned 0 after XX usecs calling tulip_init+0x0/0x33 @ 1 initcall tulip_init+0x0/0x33 returned 0 after XX usecs calling de4x5_module_init+0x0/0x1b @ 1 initcall de4x5_module_init+0x0/0x1b returned 0 after XX usecs calling init_netconsole+0x0/0x23e @ 1 console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x23e returned 0 after XX usecs calling cdrom_init+0x0/0xd @ 1 initcall cdrom_init+0x0/0xd returned 0 after XX usecs calling mon_init+0x0/0xfc @ 1 initcall mon_init+0x0/0xfc returned 0 after XX usecs calling ehci_hcd_init+0x0/0x78 @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver initcall ehci_hcd_init+0x0/0x78 returned 0 after XX usecs calling ohci_hcd_mod_init+0x0/0x54 @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver initcall ohci_hcd_mod_init+0x0/0x54 returned 0 after XX usecs calling uhci_hcd_init+0x0/0xc6 @ 1 uhci_hcd: USB Universal Host Controller Interface driver initcall uhci_hcd_init+0x0/0xc6 returned 0 after XX usecs calling acm_init+0x0/0xfd @ 1 usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters initcall acm_init+0x0/0xfd returned 0 after XX usecs calling usblp_init+0x0/0x1b @ 1 usbcore: registered new interface driver usblp initcall usblp_init+0x0/0x1b returned 0 after XX usecs calling usb_serial_init+0x0/0x1e5 @ 1 usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core initcall usb_serial_init+0x0/0x1e5 returned 0 after XX usecs calling pl2303_init+0x0/0x58 @ 1 USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver initcall pl2303_init+0x0/0x58 returned 0 after XX usecs calling i8042_init+0x0/0x3a2 @ 1 i8042: PNP: No PS/2 controller found. Probing ports directly. i8042: No controller found initcall i8042_init+0x0/0x3a2 returned -19 after XX usecs calling serport_init+0x0/0x34 @ 1 initcall serport_init+0x0/0x34 returned 0 after XX usecs calling mousedev_init+0x0/0x8e @ 1 mousedev: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x8e returned 0 after XX usecs calling joydev_init+0x0/0x12 @ 1 initcall joydev_init+0x0/0x12 returned 0 after XX usecs calling evdev_init+0x0/0x12 @ 1 initcall evdev_init+0x0/0x12 returned 0 after XX usecs calling atkbd_init+0x0/0x27 @ 1 initcall atkbd_init+0x0/0x27 returned 0 after XX usecs calling cmos_init+0x0/0x6a @ 1 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of rtc_cmos failed with error -38 initcall cmos_init+0x0/0x6a returned -19 after XX usecs calling i2c_dev_init+0x0/0xca @ 1 i2c /dev entries driver initcall i2c_dev_init+0x0/0xca returned 0 after XX usecs calling i2c_piix4_init+0x0/0x1b @ 1 initcall i2c_piix4_init+0x0/0x1b returned 0 after XX usecs calling sm_it87_init+0x0/0x3f5 @ 1 initcall sm_it87_init+0x0/0x3f5 returned -19 after XX usecs calling k8temp_init+0x0/0x1b @ 1 initcall k8temp_init+0x0/0x1b returned 0 after XX usecs calling sm_vt8231_init+0x0/0x1b @ 1 initcall sm_vt8231_init+0x0/0x1b returned 0 after XX usecs calling raid_init+0x0/0x12 @ 1 md: raid1 personality registered for level 1 initcall raid_init+0x0/0x12 returned 0 after XX usecs calling raid5_init+0x0/0x2c @ 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 initcall raid5_init+0x0/0x2c returned 0 after XX usecs calling dm_init+0x0/0x46 @ 1 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx initcall dm_init+0x0/0x46 returned 0 after XX usecs calling dm_crypt_init+0x0/0x69 @ 1 initcall dm_crypt_init+0x0/0x69 returned 0 after XX usecs calling dm_snapshot_init+0x0/0x205 @ 1 initcall dm_snapshot_init+0x0/0x205 returned 0 after XX usecs calling dm_mirror_init+0x0/0x79 @ 1 initcall dm_mirror_init+0x0/0x79 returned 0 after XX usecs calling dm_dirty_log_init+0x0/0x59 @ 1 initcall dm_dirty_log_init+0x0/0x59 returned 0 after XX usecs calling cpufreq_stats_init+0x0/0x9d @ 1 initcall cpufreq_stats_init+0x0/0x9d returned 0 after XX usecs calling cpufreq_gov_dbs_init+0x0/0x5e @ 1 initcall cpufreq_gov_dbs_init+0x0/0x5e returned 0 after XX usecs calling init_ladder+0x0/0x12 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after XX usecs calling init_menu+0x0/0x12 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x12 returned 0 after XX usecs calling hid_init+0x0/0x4d @ 1 initcall hid_init+0x0/0x4d returned 0 after XX usecs calling a4_init+0x0/0x1b @ 1 initcall a4_init+0x0/0x1b returned 0 after XX usecs calling apple_init+0x0/0x38 @ 1 initcall apple_init+0x0/0x38 returned 0 after XX usecs calling belkin_init+0x0/0x1b @ 1 initcall belkin_init+0x0/0x1b returned 0 after XX usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after XX usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after XX usecs calling cp_init+0x0/0x1b @ 1 initcall cp_init+0x0/0x1b returned 0 after XX usecs calling dr_init+0x0/0x1b @ 1 initcall dr_init+0x0/0x1b returned 0 after XX usecs calling ez_init+0x0/0x1b @ 1 initcall ez_init+0x0/0x1b returned 0 after XX usecs calling gyration_init+0x0/0x1b @ 1 initcall gyration_init+0x0/0x1b returned 0 after XX usecs calling ks_init+0x0/0x1b @ 1 initcall ks_init+0x0/0x1b returned 0 after XX usecs calling kye_init+0x0/0x1b @ 1 initcall kye_init+0x0/0x1b returned 0 after XX usecs calling lg_init+0x0/0x1b @ 1 initcall lg_init+0x0/0x1b returned 0 after XX usecs calling ms_init+0x0/0x1b @ 1 initcall ms_init+0x0/0x1b returned 0 after XX usecs calling mr_init+0x0/0x1b @ 1 initcall mr_init+0x0/0x1b returned 0 after XX usecs calling ntrig_init+0x0/0x1b @ 1 initcall ntrig_init+0x0/0x1b returned 0 after XX usecs calling ortek_init+0x0/0x1b @ 1 initcall ortek_init+0x0/0x1b returned 0 after XX usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after XX usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after XX usecs calling samsung_init+0x0/0x1b @ 1 initcall samsung_init+0x0/0x1b returned 0 after XX usecs calling sjoy_init+0x0/0x1b @ 1 initcall sjoy_init+0x0/0x1b returned 0 after XX usecs calling sony_init+0x0/0x1b @ 1 initcall sony_init+0x0/0x1b returned 0 after XX usecs calling sp_init+0x0/0x1b @ 1 initcall sp_init+0x0/0x1b returned 0 after XX usecs calling ga_init+0x0/0x1b @ 1 initcall ga_init+0x0/0x1b returned 0 after XX usecs calling tm_init+0x0/0x1b @ 1 initcall tm_init+0x0/0x1b returned 0 after XX usecs calling ts_init+0x0/0x1b @ 1 initcall ts_init+0x0/0x1b returned 0 after XX usecs calling twinhan_init+0x0/0x1b @ 1 initcall twinhan_init+0x0/0x1b returned 0 after XX usecs calling zp_init+0x0/0x1b @ 1 initcall zp_init+0x0/0x1b returned 0 after XX usecs calling hid_init+0x0/0x79 @ 1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver initcall hid_init+0x0/0x79 returned 0 after XX usecs calling staging_init+0x0/0x8 @ 1 initcall staging_init+0x0/0x8 returned 0 after XX usecs calling alsa_hwdep_init+0x0/0x64 @ 1 initcall alsa_hwdep_init+0x0/0x64 returned 0 after XX usecs calling alsa_timer_init+0x0/0x146 @ 1 initcall alsa_timer_init+0x0/0x146 returned 0 after XX usecs calling alsa_pcm_init+0x0/0x6c @ 1 initcall alsa_pcm_init+0x0/0x6c returned 0 after XX usecs calling snd_mem_init+0x0/0x2c @ 1 initcall snd_mem_init+0x0/0x2c returned 0 after XX usecs calling patch_realtek_init+0x0/0x12 @ 1 initcall patch_realtek_init+0x0/0x12 returned 0 after XX usecs calling patch_cmedia_init+0x0/0x12 @ 1 initcall patch_cmedia_init+0x0/0x12 returned 0 after XX usecs calling patch_analog_init+0x0/0x12 @ 1 initcall patch_analog_init+0x0/0x12 returned 0 after XX usecs calling patch_sigmatel_init+0x0/0x12 @ 1 initcall patch_sigmatel_init+0x0/0x12 returned 0 after XX usecs calling patch_si3054_init+0x0/0x12 @ 1 initcall patch_si3054_init+0x0/0x12 returned 0 after XX usecs calling patch_cirrus_init+0x0/0x12 @ 1 initcall patch_cirrus_init+0x0/0x12 returned 0 after XX usecs calling patch_ca0110_init+0x0/0x12 @ 1 initcall patch_ca0110_init+0x0/0x12 returned 0 after XX usecs calling patch_conexant_init+0x0/0x12 @ 1 initcall patch_conexant_init+0x0/0x12 returned 0 after XX usecs calling patch_via_init+0x0/0x12 @ 1 initcall patch_via_init+0x0/0x12 returned 0 after XX usecs calling patch_hdmi_init+0x0/0x12 @ 1 initcall patch_hdmi_init+0x0/0x12 returned 0 after XX usecs calling alsa_card_azx_init+0x0/0x1b @ 1 initcall alsa_card_azx_init+0x0/0x1b returned 0 after XX usecs calling alsa_sound_last_init+0x0/0x6f @ 1 ALSA device list: No soundcards found. initcall alsa_sound_last_init+0x0/0x6f returned 0 after XX usecs calling llc_init+0x0/0x20 @ 1 initcall llc_init+0x0/0x20 returned 0 after XX usecs calling snap_init+0x0/0x39 @ 1 initcall snap_init+0x0/0x39 returned 0 after XX usecs calling blackhole_module_init+0x0/0x12 @ 1 initcall blackhole_module_init+0x0/0x12 returned 0 after XX usecs calling police_init_module+0x0/0x12 @ 1 initcall police_init_module+0x0/0x12 returned 0 after XX usecs calling cbq_module_init+0x0/0x12 @ 1 initcall cbq_module_init+0x0/0x12 returned 0 after XX usecs calling htb_module_init+0x0/0x12 @ 1 initcall htb_module_init+0x0/0x12 returned 0 after XX usecs calling red_module_init+0x0/0x12 @ 1 initcall red_module_init+0x0/0x12 returned 0 after XX usecs calling gred_module_init+0x0/0x12 @ 1 initcall gred_module_init+0x0/0x12 returned 0 after XX usecs calling ingress_module_init+0x0/0x12 @ 1 initcall ingress_module_init+0x0/0x12 returned 0 after XX usecs calling dsmark_module_init+0x0/0x12 @ 1 initcall dsmark_module_init+0x0/0x12 returned 0 after XX usecs calling sfb_module_init+0x0/0x12 @ 1 initcall sfb_module_init+0x0/0x12 returned 0 after XX usecs calling sfq_module_init+0x0/0x12 @ 1 initcall sfq_module_init+0x0/0x12 returned 0 after XX usecs calling tbf_module_init+0x0/0x12 @ 1 initcall tbf_module_init+0x0/0x12 returned 0 after XX usecs calling teql_init+0x0/0xf1 @ 1 initcall teql_init+0x0/0xf1 returned 0 after XX usecs calling prio_module_init+0x0/0x12 @ 1 initcall prio_module_init+0x0/0x12 returned 0 after XX usecs calling mqprio_module_init+0x0/0x12 @ 1 initcall mqprio_module_init+0x0/0x12 returned 0 after XX usecs calling choke_module_init+0x0/0x12 @ 1 initcall choke_module_init+0x0/0x12 returned 0 after XX usecs calling init_u32+0x0/0x2e @ 1 u32 classifier Actions configured initcall init_u32+0x0/0x2e returned 0 after XX usecs calling init_route4+0x0/0x12 @ 1 initcall init_route4+0x0/0x12 returned 0 after XX usecs calling init_fw+0x0/0x12 @ 1 initcall init_fw+0x0/0x12 returned 0 after XX usecs calling init_rsvp+0x0/0x12 @ 1 initcall init_rsvp+0x0/0x12 returned 0 after XX usecs calling init_tcindex+0x0/0x12 @ 1 initcall init_tcindex+0x0/0x12 returned 0 after XX usecs calling init_rsvp+0x0/0x12 @ 1 initcall init_rsvp+0x0/0x12 returned 0 after XX usecs calling init_basic+0x0/0x12 @ 1 initcall init_basic+0x0/0x12 returned 0 after XX usecs calling init_cgroup_cls+0x0/0x3c @ 1 initcall init_cgroup_cls+0x0/0x3c returned 0 after XX usecs calling nfnetlink_init+0x0/0x27 @ 1 Netfilter messages via NETLINK v0.30. initcall nfnetlink_init+0x0/0x27 returned 0 after XX usecs calling nfnetlink_queue_init+0x0/0xa4 @ 1 initcall nfnetlink_queue_init+0x0/0xa4 returned 0 after XX usecs calling nfnetlink_log_init+0x0/0xd7 @ 1 initcall nfnetlink_log_init+0x0/0xd7 returned 0 after XX usecs calling nf_conntrack_standalone_init+0x0/0x12 @ 1 nf_conntrack version 0.5.0 (1370 buckets, 5480 max) initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after XX usecs calling ctnetlink_init+0x0/0x76 @ 1 ctnetlink v0.93: registering with nfnetlink. initcall ctnetlink_init+0x0/0x76 returned 0 after XX usecs calling nf_conntrack_ftp_init+0x0/0x1a4 @ 1 initcall nf_conntrack_ftp_init+0x0/0x1a4 returned 0 after XX usecs calling nf_conntrack_h323_init+0x0/0xd4 @ 1 initcall nf_conntrack_h323_init+0x0/0xd4 returned 0 after XX usecs calling nf_conntrack_irc_init+0x0/0x181 @ 1 initcall nf_conntrack_irc_init+0x0/0x181 returned 0 after XX usecs calling nf_conntrack_sip_init+0x0/0x1ca @ 1 initcall nf_conntrack_sip_init+0x0/0x1ca returned 0 after XX usecs calling xt_init+0x0/0x117 @ 1 initcall xt_init+0x0/0x117 returned 0 after XX usecs calling tcpudp_mt_init+0x0/0x17 @ 1 initcall tcpudp_mt_init+0x0/0x17 returned 0 after XX usecs calling mark_mt_init+0x0/0x40 @ 1 initcall mark_mt_init+0x0/0x40 returned 0 after XX usecs calling connmark_mt_init+0x0/0x40 @ 1 initcall connmark_mt_init+0x0/0x40 returned 0 after XX usecs calling classify_tg_init+0x0/0x17 @ 1 initcall classify_tg_init+0x0/0x17 returned 0 after XX usecs calling dscp_tg_init+0x0/0x17 @ 1 initcall dscp_tg_init+0x0/0x17 returned 0 after XX usecs calling hl_tg_init+0x0/0x17 @ 1 initcall hl_tg_init+0x0/0x17 returned 0 after XX usecs calling nflog_tg_init+0x0/0x12 @ 1 initcall nflog_tg_init+0x0/0x12 returned 0 after XX usecs calling nfqueue_tg_init+0x0/0x17 @ 1 initcall nfqueue_tg_init+0x0/0x17 returned 0 after XX usecs calling tcpmss_tg_init+0x0/0x17 @ 1 initcall tcpmss_tg_init+0x0/0x17 returned 0 after XX usecs calling comment_mt_init+0x0/0x12 @ 1 initcall comment_mt_init+0x0/0x12 returned 0 after XX usecs calling connbytes_mt_init+0x0/0x12 @ 1 initcall connbytes_mt_init+0x0/0x12 returned 0 after XX usecs calling connlimit_mt_init+0x0/0x17 @ 1 initcall connlimit_mt_init+0x0/0x17 returned 0 after XX usecs calling conntrack_mt_init+0x0/0x17 @ 1 initcall conntrack_mt_init+0x0/0x17 returned 0 after XX usecs calling dscp_mt_init+0x0/0x17 @ 1 initcall dscp_mt_init+0x0/0x17 returned 0 after XX usecs calling hashlimit_mt_init+0x0/0x8c @ 1 initcall hashlimit_mt_init+0x0/0x8c returned 0 after XX usecs calling helper_mt_init+0x0/0x12 @ 1 initcall helper_mt_init+0x0/0x12 returned 0 after XX usecs calling hl_mt_init+0x0/0x17 @ 1 initcall hl_mt_init+0x0/0x17 returned 0 after XX usecs calling length_mt_init+0x0/0x17 @ 1 initcall length_mt_init+0x0/0x17 returned 0 after XX usecs calling limit_mt_init+0x0/0x12 @ 1 initcall limit_mt_init+0x0/0x12 returned 0 after XX usecs calling mac_mt_init+0x0/0x12 @ 1 initcall mac_mt_init+0x0/0x12 returned 0 after XX usecs calling multiport_mt_init+0x0/0x17 @ 1 initcall multiport_mt_init+0x0/0x17 returned 0 after XX usecs calling xt_osf_init+0x0/0x8d @ 1 initcall xt_osf_init+0x0/0x8d returned 0 after XX usecs calling owner_mt_init+0x0/0x12 @ 1 initcall owner_mt_init+0x0/0x12 returned 0 after XX usecs calling pkttype_mt_init+0x0/0x12 @ 1 initcall pkttype_mt_init+0x0/0x12 returned 0 after XX usecs calling quota_mt_init+0x0/0x12 @ 1 initcall quota_mt_init+0x0/0x12 returned 0 after XX usecs calling realm_mt_init+0x0/0x12 @ 1 initcall realm_mt_init+0x0/0x12 returned 0 after XX usecs calling recent_mt_init+0x0/0x7a @ 1 initcall recent_mt_init+0x0/0x7a returned 0 after XX usecs calling state_mt_init+0x0/0x12 @ 1 initcall state_mt_init+0x0/0x12 returned 0 after XX usecs calling statistic_mt_init+0x0/0x12 @ 1 initcall statistic_mt_init+0x0/0x12 returned 0 after XX usecs calling string_mt_init+0x0/0x12 @ 1 initcall string_mt_init+0x0/0x12 returned 0 after XX usecs calling tcpmss_mt_init+0x0/0x17 @ 1 initcall tcpmss_mt_init+0x0/0x17 returned 0 after XX usecs calling u32_mt_init+0x0/0x12 @ 1 initcall u32_mt_init+0x0/0x12 returned 0 after XX usecs calling sysctl_ipv4_init+0x0/0x87 @ 1 initcall sysctl_ipv4_init+0x0/0x87 returned 0 after XX usecs calling ipip_init+0x0/0x60 @ 1 IPv4 over IPv4 tunneling driver initcall ipip_init+0x0/0x60 returned 0 after XX usecs calling init_syncookies+0x0/0x19 @ 1 initcall init_syncookies+0x0/0x19 returned 0 after XX usecs calling tunnel4_init+0x0/0x66 @ 1 initcall tunnel4_init+0x0/0x66 returned 0 after XX usecs calling ipv4_netfilter_init+0x0/0x12 @ 1 initcall ipv4_netfilter_init+0x0/0x12 returned 0 after XX usecs calling nf_conntrack_l3proto_ipv4_init+0x0/0x14b @ 1 initcall nf_conntrack_l3proto_ipv4_init+0x0/0x14b returned 0 after XX usecs calling nf_nat_init+0x0/0x111 @ 1 initcall nf_nat_init+0x0/0x111 returned 0 after XX usecs calling nf_defrag_init+0x0/0x17 @ 1 initcall nf_defrag_init+0x0/0x17 returned 0 after XX usecs calling nf_nat_ftp_init+0x0/0x1f @ 1 initcall nf_nat_ftp_init+0x0/0x1f returned 0 after XX usecs calling init+0x0/0xd7 @ 1 initcall init+0x0/0xd7 returned 0 after XX usecs calling nf_nat_irc_init+0x0/0x1f @ 1 initcall nf_nat_irc_init+0x0/0x1f returned 0 after XX usecs calling nf_nat_sip_init+0x0/0xa9 @ 1 initcall nf_nat_sip_init+0x0/0xa9 returned 0 after XX usecs calling ip_tables_init+0x0/0xaa @ 1 ip_tables: (C) 2000-2006 Netfilter Core Team initcall ip_tables_init+0x0/0xaa returned 0 after XX usecs calling iptable_filter_init+0x0/0x6f @ 1 initcall iptable_filter_init+0x0/0x6f returned 0 after XX usecs calling iptable_mangle_init+0x0/0x51 @ 1 initcall iptable_mangle_init+0x0/0x51 returned 0 after XX usecs calling nf_nat_standalone_init+0x0/0x59 @ 1 initcall nf_nat_standalone_init+0x0/0x59 returned 0 after XX usecs calling ecn_mt_init+0x0/0x12 @ 1 initcall ecn_mt_init+0x0/0x12 returned 0 after XX usecs calling ecn_tg_init+0x0/0x12 @ 1 initcall ecn_tg_init+0x0/0x12 returned 0 after XX usecs calling log_tg_init+0x0/0x29 @ 1 initcall log_tg_init+0x0/0x29 returned 0 after XX usecs calling masquerade_tg_init+0x0/0x39 @ 1 initcall masquerade_tg_init+0x0/0x39 returned 0 after XX usecs calling netmap_tg_init+0x0/0x12 @ 1 initcall netmap_tg_init+0x0/0x12 returned 0 after XX usecs calling redirect_tg_init+0x0/0x12 @ 1 initcall redirect_tg_init+0x0/0x12 returned 0 after XX usecs calling reject_tg_init+0x0/0x12 @ 1 initcall reject_tg_init+0x0/0x12 returned 0 after XX usecs calling ip_queue_init+0x0/0x13a @ 1 initcall ip_queue_init+0x0/0x13a returned 0 after XX usecs calling inet_diag_init+0x0/0x72 @ 1 initcall inet_diag_init+0x0/0x72 returned 0 after XX usecs calling tcp_diag_init+0x0/0x12 @ 1 initcall tcp_diag_init+0x0/0x12 returned 0 after XX usecs calling bictcp_register+0x0/0x12 @ 1 TCP bic registered initcall bictcp_register+0x0/0x12 returned 0 after XX usecs calling cubictcp_register+0x0/0x6c @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x6c returned 0 after XX usecs calling tcp_westwood_register+0x0/0x12 @ 1 TCP westwood registered initcall tcp_westwood_register+0x0/0x12 returned 0 after XX usecs calling hybla_register+0x0/0x12 @ 1 TCP hybla registered initcall hybla_register+0x0/0x12 returned 0 after XX usecs calling tcp_vegas_register+0x0/0x14 @ 1 TCP vegas registered initcall tcp_vegas_register+0x0/0x14 returned 0 after XX usecs calling inet6_init+0x0/0x2ba @ 1 NET: Registered protocol family 10 initcall inet6_init+0x0/0x2ba returned 0 after XX usecs calling tunnel6_init+0x0/0x66 @ 1 initcall tunnel6_init+0x0/0x66 returned 0 after XX usecs calling ip6_tables_init+0x0/0xaa @ 1 ip6_tables: (C) 2000-2006 Netfilter Core Team initcall ip6_tables_init+0x0/0xaa returned 0 after XX usecs calling ip6table_filter_init+0x0/0x6f @ 1 initcall ip6table_filter_init+0x0/0x6f returned 0 after XX usecs calling ip6table_mangle_init+0x0/0x51 @ 1 initcall ip6table_mangle_init+0x0/0x51 returned 0 after XX usecs calling nf_conntrack_l3proto_ipv6_init+0x0/0xfc @ 1 initcall nf_conntrack_l3proto_ipv6_init+0x0/0xfc returned 0 after XX usecs calling nf_defrag_init+0x0/0x54 @ 1 initcall nf_defrag_init+0x0/0x54 returned 0 after XX usecs calling log_tg6_init+0x0/0x29 @ 1 initcall log_tg6_init+0x0/0x29 returned 0 after XX usecs calling reject_tg6_init+0x0/0x12 @ 1 initcall reject_tg6_init+0x0/0x12 returned 0 after XX usecs calling sit_init+0x0/0x60 @ 1 IPv6 over IPv4 tunneling driver initcall sit_init+0x0/0x60 returned 0 after XX usecs calling ip6_tunnel_init+0x0/0x8e @ 1 initcall ip6_tunnel_init+0x0/0x8e returned 0 after XX usecs calling packet_init+0x0/0x47 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after XX usecs calling br_init+0x0/0xa2 @ 1 initcall br_init+0x0/0xa2 returned 0 after XX usecs calling init_rpcsec_gss+0x0/0x4d @ 1 initcall init_rpcsec_gss+0x0/0x4d returned 0 after XX usecs calling vlan_proto_init+0x0/0x82 @ 1 802.1Q VLAN Support v1.8 initcall vlan_proto_init+0x0/0x82 returned 0 after XX usecs calling init_dns_resolver+0x0/0x108 @ 1 Registering the dns_resolver key type initcall init_dns_resolver+0x0/0x108 returned 0 after XX usecs calling mcheck_debugfs_init+0x0/0x3b @ 1 initcall mcheck_debugfs_init+0x0/0x3b returned 0 after XX usecs calling severities_debugfs_init+0x0/0x3b @ 1 initcall severities_debugfs_init+0x0/0x3b returned 0 after XX usecs calling hpet_insert_resource+0x0/0x23 @ 1 initcall hpet_insert_resource+0x0/0x23 returned 1 after XX usecs initcall hpet_insert_resource+0x0/0x23 returned with error code 1 calling lapic_insert_resource+0x0/0x3f @ 1 initcall lapic_insert_resource+0x0/0x3f returned -1 after XX usecs initcall lapic_insert_resource+0x0/0x3f returned with error code -1 calling io_apic_bug_finalize+0x0/0x1b @ 1 initcall io_apic_bug_finalize+0x0/0x1b returned 0 after XX usecs calling check_early_ioremap_leak+0x0/0x50 @ 1 initcall check_early_ioremap_leak+0x0/0x50 returned 0 after XX usecs calling pat_memtype_list_init+0x0/0x32 @ 1 initcall pat_memtype_list_init+0x0/0x32 returned 0 after XX usecs calling sched_init_debug+0x0/0x24 @ 1 initcall sched_init_debug+0x0/0x24 returned 0 after XX usecs calling init_oops_id+0x0/0x31 @ 1 initcall init_oops_id+0x0/0x31 returned 0 after XX usecs calling printk_late_init+0x0/0x50 @ 1 initcall printk_late_init+0x0/0x50 returned 0 after XX usecs calling pm_qos_power_init+0x0/0xca @ 1 initcall pm_qos_power_init+0x0/0xca returned 0 after XX usecs calling alarmtimer_init_late+0x0/0x73 @ 1 No RTC device found, ALARM timers will not wake from suspend initcall alarmtimer_init_late+0x0/0x73 returned 0 after XX usecs calling clear_boot_tracer+0x0/0x2d @ 1 initcall clear_boot_tracer+0x0/0x2d returned 0 after XX usecs calling max_swapfiles_check+0x0/0x8 @ 1 initcall max_swapfiles_check+0x0/0x8 returned 0 after XX usecs calling set_recommended_min_free_kbytes+0x0/0x82 @ 1 initcall set_recommended_min_free_kbytes+0x0/0x82 returned 0 after XX usecs calling random32_reseed+0x0/0xb3 @ 1 initcall random32_reseed+0x0/0xb3 returned 0 after XX usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after XX usecs calling pci_sysfs_init+0x0/0x51 @ 1 initcall pci_sysfs_init+0x0/0x51 returned 0 after XX usecs calling boot_wait_for_devices+0x0/0x30 @ 1 XENBUS: Device with no driver: device/console/0 initcall boot_wait_for_devices+0x0/0x30 returned 0 after XX usecs calling seqgen_init+0x0/0xf @ 1 initcall seqgen_init+0x0/0xf returned 0 after XX usecs calling scsi_complete_async_scans+0x0/0x11b @ 1 initcall scsi_complete_async_scans+0x0/0x11b returned 0 after XX usecs calling rtc_hctosys+0x0/0x10d @ 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) initcall rtc_hctosys+0x0/0x10d returned -19 after XX usecs calling powernowk8_init+0x0/0x1bf @ 1 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup initcall powernowk8_init+0x0/0x1bf returned -19 after XX usecs calling acpi_cpufreq_init+0x0/0xc1 @ 1 initcall acpi_cpufreq_init+0x0/0xc1 returned 0 after XX usecs calling memmap_init+0x0/0x34 @ 1 initcall memmap_init+0x0/0x34 returned 0 after XX usecs calling pci_mmcfg_late_insert_resources+0x0/0x5e @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x5e returned 1 after XX usecs initcall pci_mmcfg_late_insert_resources+0x0/0x5e returned with error code 1 calling tcp_congestion_default+0x0/0x12 @ 1 initcall tcp_congestion_default+0x0/0x12 returned 0 after XX usecs calling ip_auto_config+0x0/0xd7b @ 1 IP-Config: Complete: device=eth0, addr=192.168.12.1, mask=255.255.255.0, gw=192.168.12.2, host=yumi, domain=, nis-domain=uguu.de, bootserver=127.0.255.255, rootserver=127.0.255.255, rootpath= initcall ip_auto_config+0x0/0xd7b returned 0 after XX usecs calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after XX usecs async_waiting @ 1 async_continuing @ 1 after 0 usec md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect async_waiting @ 1 async_continuing @ 1 after 0 usec md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs (xvda1): error: couldn't mount because of unsupported optional features (240) EXT2-fs (xvda1): error: couldn't mount because of unsupported optional features (240) EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 202:1. -- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |