[Xen-devel] dom0 crash with unstable

["Bryan D. Payne" <bryan@xxxxxxxxxxxx>]

I'm trying to install Xen-unstable on a new machine.  At first boot,
I'm getting a dom0 crash.  The crash output is shown below.  The
complete console log is attached.

(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xe)
(XEN) Freed 148kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
(XEN) traps.c:466:d0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=000]
(XEN) domain_crash_sync called from entry.S
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) ----[ Xen-3.5-unstable  x86_64  debug=y  Not tainted ]----
(XEN) CPU:    0
(XEN) RIP:    e033:[<ffffffff819067de>]
(XEN) RFLAGS: 0000000000000212   EM: 1   CONTEXT: pv guest
(XEN) rax: ffffffff865ce000   rbx: ffffffff81001000   rcx: 0000000000000006
(XEN) rdx: 0000000000800000   rsi: 00000000deadbeef   rdi: 00000000deadbeef
(XEN) rbp: ffffffff81807fa8   rsp: ffffffff81807f68   r8:  000000000000001d
(XEN) r9:  ffffffff81807fd8   r10: 0000000006606000   r11: 00000000818ec000
(XEN) r12: 0000000000000000   r13: 0000000000000000   r14: 0000000000000000
(XEN) r15: 0000000000000000   cr0: 000000008005003b   cr4: 00000000000026f0
(XEN) cr3: 0000000919001000   cr2: 0000000000000000
(XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
(XEN) Guest stack trace from rsp=ffffffff81807f68:
(XEN)    0000000000000006 00000000818ec000 ffffffff819067de 000000010000e030
(XEN)    0000000000010012 ffffffff81807fa8 000000000000e02b ffffffff81906d64
(XEN)    ffffffff81807ff8 ffffffff81906166 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000001 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000
(XEN) Domain 0 crashed: rebooting machine in 5 seconds.

I pulled from Xen unstable yesterday (bd376919f03a tip), and built it
simply using "make world".  The machine has four Intel E5540
processors and 36GB of RAM.  In the BIOS, I have VT-d disabled, and
VT-x enabled.  Any suggestions on what steps I should take for
debugging this problem and getting dom0 to boot?

Thanks,
bryan

Attachment: log.txt
Description: Text document

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel