[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Xen cannot boot with pvops dom0



On 06/25/09 02:20, Han, Weidong wrote:
> I tried with latest Xen unstable (c/s 19833) with latest pvops dom0 (commit 
> 384a55c0). Booting will hang, following is the serial console output: 
>
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to 
> Xen
> )
> (XEN) Freed 128kB init memory.
> mapping kernel into physical memory
> Xen: setup ISA identity maps
> about to get started...
> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
> (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
> (XEN) ioapic_guest_write: apic=0, pin=0, old_irq=-1, new_irq=0
> (XEN) ioapic_guest_write: old_entry=00010900, new_entry=000009f0
> (XEN) ioapic_guest_write: Attempt to add IO-APIC pin for in-use IRQ!
> (XEN) ioapic_guest_write: apic=0, pin=19, old_irq=19, new_irq=19
> (XEN) ioapic_guest_write: old_entry=0000a9c0, new_entry=0001a9c0
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
> (XEN) ioapic_guest_write: apic=0, pin=19, old_irq=19, new_irq=19
> (XEN) ioapic_guest_write: old_entry=0000a9c0, new_entry=0001a9c0
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
> (XEN) ioapic_guest_write: apic=0, pin=23, old_irq=23, new_irq=23
> (XEN) ioapic_guest_write: old_entry=0000a9d0, new_entry=0001a9d0
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
> (XEN) ioapic_guest_write: apic=0, pin=19, old_irq=19, new_irq=19
> (XEN) ioapic_guest_write: old_entry=0000a9c0, new_entry=0001a9c0
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
> (XEN) ioapic_guest_write: apic=0, pin=16, old_irq=16, new_irq=16
> (XEN) ioapic_guest_write: old_entry=0000a9b8, new_entry=0001a9b8
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
> (XEN) ioapic_guest_write: apic=0, pin=18, old_irq=18, new_irq=18
> (XEN) ioapic_guest_write: old_entry=0000a921, new_entry=0001a921
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
>   

The ioapic_guest_write messages are just noise, and have no bearing on
the problem.  Are there no more messages from the kernel after "about to
get started"?  The ioapic messages at least tell us it is getting quite
a distance into the boot and discovering devices.

> Did anyone meet this issue? Is there any difference on build and installation 
> between pvops dom0 and 2.6.18 dom0? Following is my instructions, pls correct 
> me if something is wrong. Appreciate in advance.
>  
> My build and installation instructions:
>       - cd xen-unstable.hg
>       - make world (linux-2.6-pvops.git will be cloned)
>       - make install
>
> My grub entry:
>       title Xen - pvops
>               root (hd0,2)
>               kernel /boot/xen.gz dom0_mem=512m
>               module /boot/vmlinuz-2.6-30.rc3-tip ro root=/dev/sda3 
> console=tty0 console=ttyS0
>   

What happens if you have "console=hvc0 earlyprintk=xen ignore_loglevel"
on the "module" line?  You should get more output from the kernel.  You
might also want "console=com1,vga" on the Xen line.

    J

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.