[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-devel] Problem with blktap2



I don't meet the error about vif before. Maybe this is a new issue. I will try 
to raise it again and look into it.
For the qemu error, my patch send before will fixed it which is not check in. 
you can use the older config tap:qcow2 to work. 

Best Regards
--yang

-----Original Message-----
From: Jun Koi [mailto:junkoi2004@xxxxxxxxx] 
Sent: 2009年6月19日 12:21
To: Zhang, Yang
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-devel] Problem with blktap2

2009/6/19 Zhang, Yang <yang.zhang@xxxxxxxxx>:
> Sorry, qemu's issue also has been fixed by c/s 
> 5e592af4bc5649ef0066c77db445c3be26b4c7bb.
>

I got the latest code, but the problem still stands.

Now the error is a bit different:

"Error: Device 0 (vif) could not be connected. Hotplug scripts not working."


And below is the qemu log file. Do you have any suggestion?

Thanks,
J


domid: 3
qemu: the number of cpus is 1
config qemu network with xen bridge for  tap3.0 xenbr0
Strip off blktap sub-type prefix to
qcow2:/home/xen/img.qcow2.ubuntu904 (drv 'tapdisk')
qemu: type (image format) 'tapdisk' unknown for vbd
'/local/domain/0/backend/tap/3/768/type' or image
'qcow2:/home/xen/img.qcow2.ubuntu904'
Watching /local/domain/0/device-model/3/logdirty/next-active
Watching /local/domain/0/device-model/3/command
qemu_map_cache_init nr_buckets = 4000 size 327680
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 716ebba7-593a-f4c9-3353-32ed070a4d7f
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
xs_read(/vm/716ebba7-593a-f4c9-3353-32ed070a4d7f/log-throttling): read error
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/3/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error.
/vm/716ebba7-593a-f4c9-3353-32ed070a4d7f/vncpasswd.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0




















> -----Original Message-----
> From: Jun Koi [mailto:junkoi2004@xxxxxxxxx]
> Sent: 2009年6月19日 11:35
> To: Zhang, Yang
> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [Xen-devel] Problem with blktap2
>
> 2009/6/19 Zhang, Yang <yang.zhang@xxxxxxxxx>:
>> i'm not sure that since the blktap2 changes the config. I always uses the 
>> config "tap:tapdisk:qcow2:/root/xxx". This always fine to qcow2
>>
>
> I changed my disk configuration to:
>
> disk = ['tap:tapdisk:qcow2:/home/xen/img.qcow2.ubuntu904,hda,w']
>
> But then when creating the VM, it hang up for a minute or so, and
> finally reported error like:
>
> "Error: Device 768 (tap) could not be connected. Hotplug scripts not working."
>
> You suggested to kill "tapdisk", but I dont see any process like
> "tapdisk" running in my box (only blktapctrl). Is that a problem??
>
> Then qemu log reports error like below. I am especially concerning
> about the error "type tapdisk unknown...", so I am not sure that the
> above disk configuration (..tapdisk...) is correct. Do you have any
> idea?
>
> Thanks,
> J
>
>
> cat /var/log/xen/qemu-dm-ubuntu904.log
> domid: 2
> qemu: the number of cpus is 1
> config qemu network with xen bridge for  tap2.0 xenbr0
> Strip off blktap sub-type prefix to
> qcow2:/home/xen/img.qcow2.ubuntu904 (drv 'tapdisk')
> qemu: type (image format) 'tapdisk' unknown for vbd
> '/local/domain/0/backend/tap/2/768/type' or image
> 'qcow2:/home/xen/img.qcow2.ubuntu904'
> Watching /local/domain/0/device-model/2/logdirty/next-active
> Watching /local/domain/0/device-model/2/command
> qemu_map_cache_init nr_buckets = 4000 size 327680
> shared page at pfn feffd
> buffered io page at pfn feffb
> Guest uuid = 7b6c05c7-1686-699b-dfdd-ef25da4d2039
> Time offset set 0
> populating video RAM at ff000000
> mapping video RAM from ff000000
> Register xen platform.
> Done register platform.
> xs_read(/vm/7b6c05c7-1686-699b-dfdd-ef25da4d2039/log-throttling): read error
> platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw 
> state.
> xs_read(/local/domain/0/device-model/2/xen_extended_power_mgmt): read error
> xs_read(): vncpasswd get error.
> /vm/7b6c05c7-1686-699b-dfdd-ef25da4d2039/vncpasswd.
> I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
>
>
>
>
>
>
>
>> -----Original Message-----
>> From: Jun Koi [mailto:junkoi2004@xxxxxxxxx]
>> Sent: 2009年6月19日 11:04
>> To: Zhang, Yang
>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
>> Subject: Re: [Xen-devel] Problem with blktap2
>>
>> 2009/6/19 Zhang, Yang <yang.zhang@xxxxxxxxx>:
>>>  I meet this issue before. You can reboot and have a try.
>>>  If still exist, stop xend and kill process blktapctrl and tapdisk, run 
>>> make install again to see this issue whether still exist.
>>>
>>
>> hmm. then the problem will vanish for goods? i will try now, and let
>> you know the result.
>>
>> Could you confirm that
>>
>> disk = ['tap:aio:qcow:/home/xen/img.qcow2.ubuntu904,hda,w']
>>
>> is a right configuration?
>>
>> Thanks a lot,
>> J
>>
>>
>>
>>
>>> -----Original Message-----
>>> From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx 
>>> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Jun Koi
>>> Sent: 2009年6月19日 10:38
>>> To: xen-devel@xxxxxxxxxxxxxxxxxxx
>>> Subject: [Xen-devel] Problem with blktap2
>>>
>>> Hi,
>>>
>>> I am trying to use the unstable tree (changeset: 19738) to run some old 
>>> images.
>>>
>>> My old configuration file has:
>>>
>>> disk = ['tap:qcow2:/home/xen/img.qcow2.ubuntu904,hda,w']
>>>
>>> I got the error like:
>>>
>>> ----
>>> Using config file "./ubuntu904.cfg".
>>> Error: need more than 3 values to unpack
>>>
>>> I guess that I should modify the disk configuration for new blktap2,
>>> so I changed it to :
>>>
>>> disk = ['tap:aio:qcow:/home/xen/img.qcow2.ubuntu904,hda,w']
>>> ----
>>>
>>> but then i still got the error like below:
>>>
>>> ----
>>> Using config file "./ubuntu904.cfg".
>>> Error: Failed to create device.
>>>    stdout: vbd open failed: -1
>>>    stderr:
>>> Check that target "/home/xen/img.qcow2.ubuntu904" exists and that
>>> blktap2 driver installed in dom0.
>>> ----
>>>
>>> I can confirm that I have blktap2 installed, as in
>>> /boot/config-2.6.18.8-xen I have:
>>>
>>> CONFIG_XEN_BLKDEV_TAP=y
>>> CONFIG_XEN_BLKDEV_TAP2=y
>>>
>>> So how can I fix the problem now?
>>>
>>> Thanks,
>>> J
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>> http://lists.xensource.com/xen-devel
>>>
>>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.