[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Xen 3.5-unstable freezes



Hi,

Xen 3.5-unstable froze since showing the following messages.
However, I could boot up it with 'noapic' option.

BTW, is my server broken?
  (XEN) MCE: The hardware reports a non fatal, correctable incident occured on 
CPU 0.
  (XEN) Bank 1: f200000000000105

Best regards,
 Kan

 __  __            _____  ____                     _        _     _      
 \ \/ /___ _ __   |___ / | ___|    _   _ _ __  ___| |_ __ _| |__ | | ___ 
  \  // _ \ '_ \    |_ \ |___ \ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
  /  \  __/ | | |  ___) | ___) |__| |_| | | | \__ \ || (_| | |_) | |  __/
 /_/\_\___|_| |_| |____(_)____/    \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
                                                                         
(XEN) Xen version 3.5-unstable (root@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 
20070626 (Red Hat 4.1.2-14)) Wed Jun  3 10:27:59 JST 2009
(XEN) Latest ChangeSet: Tue Jun 02 11:50:16 2009 +0100 19698:f72d26c00002
(XEN) Command line: loglvl=all guest_loglvl=all com1=9600,8n1 console=com1
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: V2; EDID transfer time: 2 seconds
(XEN) Disc information:
(XEN)  Found 1 MBR signatures
(XEN)  Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009ec00 (usable)
(XEN)  000000000009ec00 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 000000003fef0000 (usable)
(XEN)  000000003fef0000 - 000000003feff000 (reserved)
(XEN)  000000003feff000 - 000000003ff00000 (ACPI NVS)
(XEN)  000000003ff00000 - 0000000040000000 (usable)
(XEN)  00000000fec00000 - 00000000fec10000 (reserved)
(XEN)  00000000fee00000 - 00000000fee01000 (reserved)
(XEN)  00000000fff80000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1048120kB)
(XEN) ACPI: RSDP 000F8010, 0014 (r0 PTLTD )
(XEN) ACPI: RSDT 3FEFD053, 0034 (r1 PTLTD    RSDT    13E0000  LTP        0)
(XEN) ACPI: FACP 3FEFEEA0, 0074 (r1 QUANTA S31       13E0000 MSFT     1000)
(XEN) ACPI: DSDT 3FEFD087, 1E19 (r1 Quanta      S31  13E0000 MSFT  100000D)
(XEN) ACPI: FACS 3FEFFFC0, 0040
(XEN) ACPI: SPCR 3FEFEF14, 0050 (r1 PTLTD  $UCRTBL$  13E0000 PTL         1)
(XEN) ACPI: APIC 3FEFEF64, 0074 (r1 PTLTD        APIC    13E0000  LTP        0)
(XEN) ACPI: BOOT 3FEFEFD8, 0028 (r1 PTLTD  $SBFTBL$  13E0000  LTP        1)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-0000000040000000
(XEN) Xen heap: 9MB (9668kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f8080
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x508
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[544,504], pm1x_evt[540,500]
(XEN) ACPI:                  wakeup_vec[3fefffcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled)
(XEN) Processor #3 6:11 APIC version 17
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:11 APIC version 17
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-15
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[16])
(XEN) IOAPIC[1]: apic_id 2, version 17, address 0xfec01000, GSI 16-31
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 997.483 MHz processor.
(XEN) CPU: L1 I cache: 16K, L1 D cache: 16K
(XEN) CPU: L2 cache: 512K
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) MCE: The hardware reports a non fatal, correctable incident occured on 
CPU 0.
(XEN) Bank 1: f200000000000105
(XEN) mce_init: init bank1
(XEN) mce_init: init bank3
(XEN) mce_init: init bank4
(XEN) CMCI: CPU0 has no CMCI support
(XEN) CPU0: Intel(R) Pentium(R) III CPU - S         1000MHz stepping 04
(XEN) Booting processor 1/0 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 16K, L1 D cache: 16K
(XEN) CPU: L2 cache: 512K
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) MCE: The hardware reports a non fatal, correctable incident occured on 
CPU 0.
(XEN) Bank 1: f200000000000181
(XEN) mce_init: init bank1
(XEN) mce_init: init bank3
(XEN) mce_init: init bank4
(XEN) CMCI: CPU1 has no CMCI support
(XEN) CPU1: Intel(R) Pentium(R) III CPU - S         1000MHz stepping 04
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ...  failed.
(XEN) ...trying to set up timer as Virtual Wire IRQ... works.
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) Brought up 2 CPUs
(XEN) APIC error on CPU1: 00(40)
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) I/O virtualisation disabled
(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN)  Xen  kernel: 32-bit, PAE, lsb
(XEN)  Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc048a47c
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   000000003d000000->000000003e000000 (236849 pages to be 
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c048a47c
(XEN)  Init. ramdisk: c048b000->c09d1800
(XEN)  Phys-Mach map: c09d2000->c0abd4c4
(XEN)  Start info:    c0abe000->c0abe47c
(XEN)  Page tables:   c0abf000->c0aca000
(XEN)  Boot stack:    c0aca000->c0acb000
(XEN)  TOTAL:         c0000000->c0c00000
(XEN)  ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) APIC error on CPU0: 00(40)
(XEN) Scrubbing Free RAM: done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to 
Xen)
(XEN) Freed 116kB init memory.
(XEN) APIC error on CPU0: 40(40)
(XEN) io_apic.c:2130: 
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=-1, new_irq=0
(XEN) ioapic_guest_write: old_entry=00010000, new_entry=000009f0
(XEN) ioapic_guest_write: Attempt to add IO-APIC pin for in-use IRQ!
(



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.