[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Interrupt to CPU routing in HVM domains - again



(Bart - I hope you don't mind me sending your email to the list)

Keir,

As per a recent discussion I modified the IRQ code in the Windows GPLPV
drivers so that only the vcpu_info[0] structure is used, instead of
vcpu_info[current_cpu] structure. As per Bart's email below though, this
has caused him to experience performance issues.

Have I understood correctly that only cpu 0 of the vcpu_info[] array is
ever used even if the interrupt actually occurs on another vcpu? Is this
true for all versions of Xen? It seems that Bart's experience is exactly
the opposite of mine - the change that fixed up the performance issues
for me caused performance issues for him...

Bart: Can you have a look through the xen-devel list archives and have a
read of a thread with a subject of "HVM windows - PCI IRQ firing on both
CPU's", around the middle of last month? Let me know if you interpret
that any differently to me...

Thanks

James



> -----Original Message-----
> From: bart brooks [mailto:bart_brooks@xxxxxxxxxxx]
> Sent: Friday, 5 September 2008 01:19
> To: James Harper
> Subject: Performance - Update GPLPV drivers -0.9.11-pre12
> Importance: High
> 
> Hi James,
> 
> 
> 
> We have tracked down the issue where performance has dropped off after
> version 0.9.11-pre9 and still exists in version 0.9.11-pre12.
> 
> Event channel interrupts for transmit are generated only on VCPU-0,
> whereas for receive they are generated on all VCPUs in a round robin
> fashion. Post 0.9.11-pre9 it is assumed that all the interrupts are
> generated on VCPU-0, so the network interrupts generated on other
VPCUs
> are only processed if there is some activity going on VCPU-0 or an
> outstanding DPC. This caused the packets to be processed out-of-order
and
> retransmissions. Retransmissions happened after a timeout (200ms) with
no
> activity during that time. Overall it bought down the bandwidth a lot
with
> huge gaps of no activity.
> 
> 
> 
> Instead of assuming that everything is on CPU-0, the following change
was
> made in the xenpci driver in the file evtchn.c in the function
> EvtChn_Interrupt()
> 
> int cpu = KeGetCurrentProcessorNumber() & (MAX_VIRT_CPUS - 1);
> 
> This is the same code found in version  0.9.11-pre9
> 
> 
> 
> After this change, we are getting numbers comparable to 0.9.11-pre9 .
> 
> Bart
> 
> 
> ________________________________
> 
> Get more out of the Web. Learn 10 hidden secrets of Windows Live.
Learn
> Now <http://windowslive.com/connect/post/jamiethomson.spaces.live.com-
> Blog-cns!550F681DAD532637!5295.entry?ocid=TXT_TAGLM_WL_getmore_092008>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.